Antique Brush Hardwaxed Oiled Engineered Oak Code 07
From £55.00 / M2
Choose Quantity (Sold per pack and has a minimum quantity of 6 packs)
Enter the SQM of your room to calculate or qty if known.
Price Note: Delivery cost added at checkout
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Our antique light brush hardwaxed oiled engineered oak is a
beautiful paler oak floor with all the character markings you'd expect from
real rustic grade oak including knots, lovely grain markings and a subtle
undulating feel to the planks. This stunning engineered oak floor is rustic
grade which means there will be knots and other natural oak characteristics
along with colour variations making this eminently suited for older properties
or where a sense of the ‘old’ needs injecting into more modern projects.
The planks are 2.2metres in length with 2planks being machined into two sections allowing a more traditional look. Each plank is bevelled on 2sides and fits via tongue & groove system. Dimensions: 2200mm (L) x 220mm (W) x 20mm (D). This is 20mm thick engineered oak flooring with a 16mm birch ply back and 4mm solid oak surface.
PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 6 boxes (11.616sqm) on this product. Pack size is listed under the specification tab along with further information on this rustic grade oak.
SAMPLES ARE CURRENTLY NOT AVAILABLE FOR THIS PRODUCT
|Pack Size 220x2200x20/4||4 planks per pack. Pack size is 1.936sqm equating to per sqm price of £55sqm+VAT.|
|Weight||15.39kg per sqm|
|Pack Weight||30kg per pack|
|Packs Per Pallet||30 packs per pallet|
|Board Thickness||20mm thick board, 16mm ply back 4mm oak top layer|
|Finishing Oil||LOBA Hardwax White Oiled|
|Structural Board 20mm Format||This is a 20mm thick board so can be laid directly on joists using an appropriate fixing mechanism.|
|Grade||RUSTIC GRADE: Rustic grade wood has the largest range of colour variation, sap content and allows almost a limitless size and number of knots. There will be checks (stable splits) across & between the growth rings, all of which add to its natural charm. Filler will be used and the colour is traditionally dark, carefully selected to compliment the oak rather than to match it or ‘disappear’. Rustic grade oak produces a stunning, traditional vintage looking floor.|
|Blending||Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.|
|Glue-Down||We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.|
|Floating||Glue-down method is not appropriate for sub-floors that are damp, are mixed i.e. timber subfloor combined with concrete/screed sub-floor or have specific requirements such as acoustic deadening. With sub-floors of this type the Floating installation method will likely be proposed by your installer. The boards are not fixed to the sub-floor but instead uses the weight of the floor itself to keep them in place, usually with the use of an underlay between the sub-floor and boards. The tongue & groove would normally be glued in a floating installation. NB: Beswick stone do not provide underlay, glue or any other wood installation product.|