Brushed Deep Smoked UV Oiled Engineered Oak Code 10
From £52.80 / M2
(Sold per pack and has a minimum quantity of 6 packs)
0 Packs(Total coverage: 0 sqm)
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
This oak engineered flooring has been brushed and smoked to reveal the natural characteristics of the stunning rustic grade timber which includes various tones, knots and grains. It has then been finished with natural oil to not only highlight the dark wood floor’s rustic charm but also add strength and longevity. Boasting lovely warm hues ranging from honey & chestnut through to rich tobacco, these dark oak floors come in both 19cm wide and 22cm wide planks. For a more traditional look, two planks from each pack are machined into two sections and all planks are bevelled on four sides to fit neatly together via tongue and groove.
PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 6 packs on this product. Pack sizes are listed under the specification tab along with further information on this rustic grade oak.
|Pack Size 190x1900x15/4||6 planks per pack. Pack size is 2.166sqm equating to per sqm price of £44+VAT.|
|Pack Size 220x2200x20/4||4 planks per pack. Pack size is 1.936sqm equating to per sqm price of £55+VAT.|
|Weight||190 x 1900: 11.542kg per sqm | 220 x 2200: 15.39kg per sqm|
|Pack Weight||190 x 1900: 25kg per pack | 220 x 2200: 30kg per pack|
|Packs Per Pallet||190 x 1900: 38 packs per pallet | 220 x 2200: 32 packs per pallet|
|Board Thickness||190 x 1900: 15mm thick board, 11mm ply back 4mm oak top layer | 220 x 2200: 20mm thick board, 16mm ply back 4mm oak top layer|
|Finishing Oil||LOVA UV Oiled|
|Structural Board 20mm Format||This is a 20mm thick board so can be laid directly on joists using an appropriate fixing mechanism.|
|Blending||Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.|
|Glue-Down||We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.|
|Floating||Glue-down method is not appropriate for sub-floors that are damp, are mixed i.e. timber subfloor combined with concrete/screed sub-floor or have specific requirements such as acoustic deadening. With sub-floors of this type the Floating installation method will likely be proposed by your installer. The boards are not fixed to the sub-floor but instead uses the weight of the floor itself to keep them in place, usually with the use of an underlay between the sub-floor and boards. The tongue & groove would normally be glued in a floating installation. NB: Beswick stone do not provide underlay, glue or any other wood installation product.|