Product Code: P/BURT Availability: In Stock

Burlington Porcelain

From £34.80 / M2

Choose Colour


Change Colour x

(Sold per box and has a minimum quantity of 5 boxes)

Qty of boxes
(Total coverage: 0 sqm)

0 Boxes

(Total coverage: 0 sqm)
£43.20 £31.32 /boxesinc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

STUNNING LARGE 120cm x 60cm FORMAT REDUCED TO £39sqm+VAT & DELIVERY (previously £49sqm)

Roll out the red carpet? We’d far rather present our outstanding Italian porcelain version of naturally beautiful Cumbrian slate! Burlington floor and wall tiles boast all the characteristics of attractive natural stone – and the price is every bit as appealing. Offering a scene-stealing ‘WOW!’ factor that sets the stage for style and impact, this elegant Cumbrian slate-effect tile combines an authentic-looking appearance with superior quality and durability. Always on-trend earthy neutrals make Burlington not only a fabulous framework for almost any colour scheme, but also a voguish choice for the fashion conscious. Tiles are available in the following sizes 60cm x 30cm format (covering 0.9sqm per box) and 120cm x 60cm format (covering 1.44sqm per box). Available in 3 beautiful shades: White, Beige & Grey. An R11 anti-slip finish is also available in all 3 colours  - lead times and MOQs apply.

We operate a minimum order of 5 boxes on this product.

PRICES EXCLUDE DELIVERY and the price per sqm is also shown allowing easy comparison. Pack sizes are listed under the specification tab along with further information on this flagstone look porcelain floor.


Product Details
Box Size 60cm x 30cm format: 0.9sqm per box | 120cm x 60cm format: 1.44sqm per box
Box Weight 60 x 30 format: 18kg per box | 120 x 60 format: 30kg per box
Boxes Per Pallet 60 x 30 format: 52 boxes (46.8sqm) per pallet | 120 x 60: 24 boxes (34.56sqm) per pallet
Grade Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors
Installation Points Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond.
Blending Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.
Popular Grout Colours Rocatex Ultimate: Silver Grey - Limestone - Light Grey
Recommended Sealer Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc
Anti-Slip Option 10mm An R11 Anti-Slip option is available to order in all colours. Tile size is 120cm x 60cm x 1cm. If used outdoors this must be installed on a solid concrete/screed base. Lead times apply. A minimum order quantity of 36sqm applies.
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review