DUE BACK IN EARLY DECEMBER 2020 - AVAILABLE TO PRE-ORDER NOW JUST CALL 01285 885795 - DON'T MISS OUT ON THIS CRACKING DARK PARQUET BOARD AT THE FABULOUS NEW REDUCED PRICE OF £44sqm+VAT & DELIVERY! (Previously £49sqm.)
This gorgeous engineered oak herringbone flooring has been brushed and smoked to reveal the natural characteristics of the stunning rustic grade timber which includes various tones, knots and grains. It has then been finished with natural oil to not only highlight the dark wood floor’s rustic charm but also add strength and longevity. Boasting lovely warm hues ranging from honey through to rich tobacco, this dark almost warm-chestnut coloured oak parquet is a sumptuous floor – full of intrigue, delight and romance! This floor is perfect for that adult haven hide-away, be it a smallish snug or a large living room. It makes a grand statement in libraries, reading rooms and studies where a bit of gravitas goes a long way. Plank size is 600mm (L) x 125mm (W) x 20mm (D).
PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 20 boxes (12sqm) on this product. Pack size is listed under the specification tab along with further information on this rustic grade oak floor.
|Pack Size 125mm x 600mm x 20/4mm Herringbone||8 planks per pack. Pack size is 0.6sqm equating to per sqm £49+VAT.|
|Weight||13.5kg per sqm|
|Pack Weight||8kg per pack|
|Packs Per Pallet||100 packs per pallet|
|Board Thickness||20mm thick board, 16mm ply back 4mm oak top layer|
|Grade||RUSTIC GRADE: Rustic grade wood has the largest range of colour variation, sap content and allows almost a limitless size and number of knots. There will be checks (stable splits) across & between the growth rings, all of which add to its natural charm. Filler will be used and the colour is traditionally dark, carefully selected to compliment the oak rather than to match it or ‘disappear’. Rustic grade oak produces a stunning, traditional vintage looking floor.|
|Installation Points||Engineered Herringbone Oak Flooring cannot be floated over an underlay. The planks must be solidly attached (Glue-down method) to the sub-floor using an appropriate adhesive.|
|Blending||Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.|
|Glue-Down||We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.|