Enter the SQM of your room to calculateM2
Prices include VAT
ORDER up to 4 cut samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
This is WIDE WIDE WIDE!
NOW REDUCED FROM £64sqm to £59sqm+VAT and delivery which is fabulous value for such a wide board!
Do you want light wood floors with a natural finish for a timeless look? This is the rustic wood flooring for you. The charming rustic grade oak has been antiqued and then oiled so that the natural grains, knots and colouring are at their best. Whether you are fitting out a country cottage or a town house, this oiled oak flooring will look simply stunning. Sold in packs of five planks which have been bevelled on all four sides so that they fit together via tongue and groove, this oak engineered flooring is available in a wide plank of 26cm by 2.2m length and is 20mm thick.
PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 5 boxes (14.3sqm) on this product. Pack size is listed under the specification tab along with further information on this rustic grade oak floor.
|Weight||15.39kg per sqm|
|Pack Weight||45kg per pack|
|Packs Per Pallet||22 packs per pallet|
|Board Thickness||20mm thick board, 16mm ply back 4mm oak top layer|
|Pack Size 260x2200x20/4||5 planks per pack. Pack size is 2.86sqm equating to per sqm REDUCED price of £59.00+VAT.|
|Structural Board 20mm Format||This is a 20mm thick board so can be laid directly on joists using an appropriate fixing mechanism.|
|Grade||RUSTIC GRADE: Rustic grade wood has the largest range of colour variation, sap content and allows almost a limitless size and number of knots. There will be checks (stable splits) across & between the growth rings, all of which add to its natural charm. Filler will be used and the colour is traditionally dark, carefully selected to compliment the oak rather than to match it or ‘disappear’. Rustic grade oak produces a stunning, traditional vintage looking floor.|
|Blending||Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.|
|Glue-Down||We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.|
|Floating||Glue-down method is not appropriate for sub-floors that are damp, are mixed i.e. timber subfloor combined with concrete/screed sub-floor or have specific requirements such as acoustic deadening. With sub-floors of this type the Floating installation method will likely be proposed by your installer. The boards are not fixed to the sub-floor but instead uses the weight of the floor itself to keep them in place, usually with the use of an underlay between the sub-floor and boards. The tongue & groove would normally be glued in a floating installation. NB: Beswick stone do not provide underlay, glue or any other wood installation product.|