Handscraped Deep Smoke Hardwaxed Oiled Engineered Oak Code G22
From £55.00 / M2
Choose Quantity (Sold per pack and has a minimum quantity of 5 packs)
Enter the SQM of your room to calculate or qty if known.
Price Note: Delivery cost added at checkout
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Offering a fabulous vintage shabby-chic effect, this smoke engineered oak flooring combines natural grade oak with a handscraped deep oak smoke white oiled finish to accentuate the natural knots and grains. Perfect for contemporary settings that require a sprinkling of country-contrast and just as charming in traditionally styled homes, this latte coloured rustic wood flooring is timeless. Measuring 2200mm x 220mm with a thickness of 15mm (4mm solid oak surface and 11mm ply back), each plank of this smoked engineered oak flooring is bevelled on all four sides and fits together via tongue and groove system.
Dimension: 2200mm (L) x 220mm (W) x 15mm (D).
PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 5 boxes (14.52sqm) on this product. Pack size is listed under the specification tab along with further information on this natural grade oak floor.
|Pack Size 220x2200x15/4||6 planks per pack. Pack size is 2.904sqm equating to per sqm price of £55+VAT.|
|Weight||10.3kg per sqm|
|Pack Weight||30kg per pack|
|Packs Per Pallet||30 packs|
|Board Thickness||15mm thick board, 11mm ply back 4mm oak top layer|
|Grade||NATURAL GRADE: Natural Grade wood (also known as Character Grade) flooring will include both heartwood and sapwood. It is an affordable and attractive option that is full of character. Natural grade allows a wider range of colour variation, knots are larger and there will be incidents of checks (stable splits) across & between the growth rings, all of which add to its natural charm. Filler will be used and the colour is traditionally dark, carefully selected to compliment the oak rather than to match it or ‘disappear’.|
|Blending||Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.|
|Glue-Down||We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.|
|Floating||Glue-down method is not appropriate for sub-floors that are damp, are mixed i.e. timber subfloor combined with concrete/screed sub-floor or have specific requirements such as acoustic deadening. With sub-floors of this type the Floating installation method will likely be proposed by your installer. The boards are not fixed to the sub-floor but instead uses the weight of the floor itself to keep them in place, usually with the use of an underlay between the sub-floor and boards. The tongue & groove would normally be glued in a floating installation. NB: Beswick stone do not provide underlay, glue or any other wood installation product.|