Product Code: OakCoff Availability: In Stock

Coffee Hard Waxed Engineered Oak Flooring

From £39.00 / M2

Choose Oak Sizes

1900mm x 190mm x 15/4mm

Choose Quantity (Sold per pack and has a minimum quantity of 6 packs)

0

Enter the SQM of your room to calculate or qty if known.

Or

(Total coverage: 0 sqm)

Price Note: Delivery cost added at checkout

£46.80 £101.37 /packsinc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

SPECIAL OFFER:

1.9m x 19cm x 1.5cm BACK IN STOCK - AVAILABLE TO ORDER NOW - DON'T MISS OUT ON ONE OF OUR MOST POPULAR BOARDS AT THE NEW, FABULOUS REDUCED PRICE OF £39sqm+VAT & DELIVERY! (PREVIOUSLY £49sqm.)

Coffee is a classic, unadulterated, select grade, oak floor. 

Natural oak tones combine in this hard-waxed oak engineered floor to create a classic & stylish oak floor that will suit any period of property. Coffee takes it name from the coffee coloured highlighted grain in this select grade oak which elevates the contemporary feel of this stunning oak floor.

Coffee is a warm, pre-finished oak full of charm, character & a subtle rusticity and has been hard-waxed to create a hard-wearing finish with a classic natural oak look. Coffee engineered oak flooring comes in beautiful wide 22cm board: 2200mm (L) x 220mm (W) x 20/4mm (D) & 19cm board: 1900mm (L) x 190mm (W) x 15/4mm (D). This engineered oak floor has a 4mm solid oak surface with a 16mm birch ply back. Bevelled on all four sides, the hard-waxed oak flooring boards, some of which have been machined into two sections for a more traditional look, fit together via tongue and groove.

PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 6 boxes on this product. Pack size is listed under the specification tab along with further information on this select grade oak floor.

ALSO AVAILABLE IN STUNNING LARGE FORMAT HERRINGBONE PARQUET CLICK HERE FOR HERRINGBONE


 
Product Details
Pack Size 190x1900x15/4 6 planks per pack. Pack size is 2.166sqm equating to per sqm REDUCED price of £39.00+VAT. (Previously £49sqm.)
Pack Size 220x2200x20/4 4 planks per pack. Pack size is 1.936sqm equating to per sqm REDUCED price of £49.00+VAT. (Previously £55sqm.)
Weight 190 x 1900: 11.542kg per sqm | 220 x 2200: 15.39kg per sqm
Pack Weight 190 x 1900: 25kg per pack | 220 x 2200: 30kg per pack
Packs Per Pallet 190 x 1900: 38 packs per pallet | 220 x 2200: 30 packs per pallet
Board Thickness 190 x 1900: 15mm thick board, 11mm ply back 4mm oak top layer | 220 x 2200: 20mm thick board, 16mm ply back 4mm oak top layer
Technical
Structural Board 20mm Format This is a 20mm thick board so can be laid directly on joists using an appropriate fixing mechanism.
Grade SELECT GRADE: Select grade wood is often referred to as ABC grade. This grade typically consists of a mix of near Prime boards (no knots or checks) with other boards that contain knots and checks of a limited size similar to Classic grade but less than Natural grade. There will be a degree of colour variation from heartwood and sapwood as well as some filled elements which will compliment the natural character of the oak.
Blending Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.
Glue-Down We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.
Floating Glue-down method is not appropriate for sub-floors that are damp, are mixed i.e. timber subfloor combined with concrete/screed sub-floor or have specific requirements such as acoustic deadening. With sub-floors of this type the Floating installation method will likely be proposed by your installer. The boards are not fixed to the sub-floor but instead uses the weight of the floor itself to keep them in place, usually with the use of an underlay between the sub-floor and boards. The tongue & groove would normally be glued in a floating installation. NB: Beswick stone do not provide underlay, glue or any other wood installation product.

Write a review

Please login or register to review