Product Code: OakCOHB Availability: In Stock

Coffee Hard Waxed Engineered Oak Herringbone

From £45.00 / M2

Choose Quantity (Sold per pack and has a minimum quantity of 20 packs)

0

Enter the SQM of your room to calculate or qty if known.

Or

(Total coverage: 0 sqm)

Price Note: Delivery cost added at checkout

£58.80 £32.40 /packsinc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

NOW BACK IN STOCK!

A wonderful addition to our more contemporary looking parquet oak is our popular Coffee engineered oak in classic, large format, herringbone. This sells out very quickly and we have just had a new delivery which is now available to order at the fabulous price of £45sqm+VAT and delivery (previously £49sqm.)

This is 600mm (L) x 125mm (W) x 20mm (D) engineered oak creating a stunning large format herringbone oak floor. This is select grade oak so is less rustic than many of our other offerings. The grain is beautifully highlighted with a medium-dark oil creating a wonderful statement floor.

PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 20 boxes (12sqm) on this product. Pack size is listed under the specification tab along with further information on this select grade oak floor.

Also available in stunning wide planks of 19cm or 22cm. CLICK FOR WIDE PLANKS

Product Details
Pack Size 125mm x 600mm x 20/4mm Herringbone 6 planks per pack. Pack size is 0.6sqm equating to per sqm REDUCED price of £45.00+VAT (previously £49sqm.)
Weight 13.5kg per sqm
Pack Weight 8kg per pack
Packs Per Pallet 100 packs per pallet
Board Thickness 20mm thick board, 16mm ply back 4mm oak top layer
Technical
Grade SELECT GRADE: Select grade wood is often referred to as ABC grade. This grade typically consists of a mix of near Prime boards (no knots or checks) with other boards that contain knots and checks of a limited size similar to Classic grade but less than Natural grade. There will be a degree of colour variation from heartwood and sapwood as well as some filled elements which will compliment the natural character of the oak.
Installation Points Engineered Herringbone Oak Flooring cannot be floated over an underlay. The planks must be solidly attached (glue down method) to the sub-floor using an appropriate adhesive.
Blending Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.
Glue-Down We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.

Write a review

Please login or register to review