Heavy Brushed Smoked UV Oiled Engineered Oak Code 08HB
From £49.00 / M2
Choose Quantity (Sold per pack and has a minimum quantity of 20 packs)
Enter the SQM of your room to calculate or qty if known.
Price Note: Delivery cost added at checkout
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Our best-selling oak board in a stunning large parquet
herringbone. This is rustic grade oak full of knots & splits, dark smoked
and heavy brushed to produce an absolutely beautiful, classically aged oak
floor. Our deep smoked code 08 Herringbone is like the brooding older brother
to our lighter, more chilled Heritage Herringbone! With the different grade of
oak and longer smoking time, the colours are deeper, the character more pronounced
making it a great choice for country houses and older properties or any modern scheme that would benefit from some rustic charm . Plank size is
600mm (L) x 125mm (W) x 20mm (D).
PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 20 boxes (12sqm) on this product. Pack size is listed under the specification tab along with further information on this rustic grade oak floor.
|Pack Size 125mm x 600mm x 20/4mm Herringbone||8 planks per pack. Pack size is 0.6sqm equating to per sqm price of £49+VAT.|
|Weight||13.5kg per sqm|
|Pack Weight||8kg per pack|
|Packs Per Pallet||100 packs per pallet|
|Board Thickness||20mm thick board, 16mm ply back 4mm oak top layer|
|Finishing Oil||LOBA UV Oiled|
|Grade||Rustic grade wood has the largest range of colour variation, sap content and allows almost a limitless size and number of knots. There will be checks (stable splits) across & between the growth rings, all of which add to its natural charm. Filler will be used and the colour is traditionally dark, carefully selected to compliment the oak rather than to match it or ‘disappear’. Rustic grade oak produces a stunning, traditional vintage looking floor.|
|Installation Points||Engineered Herringbone Oak Flooring cannot be floated over an underlay. The planks must be solidly attached (Glue-down method) to the sub-floor using an appropriate adhesive.|
|Blending||Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.|
|Glue-Down||We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.|