Product Code: P/LAB Availability: Pre-Order
P/LAB

LAB Porcelain

From £46.80 / M2

Choose Colour

Beige

Change Colour x

(Sold per box and has a minimum quantity of 6 boxes)

0
M2
Qty of boxes
(Total coverage: 0 sqm)

0 Boxes

(Total coverage: 0 sqm)
£46.80 /boxesinc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

CONTEMPORARY CEMENT LOOK PORCELAIN AVAILABLE FOR PRE-ORDER IN LARGE SLABS! JUST 9mm THICK! ORDER TIME OF APPROX. 4 WEEKS.

With an initial design inspiration taken from the smooth surface of laboratory floors produced from powdered cement, our LAB porcelain collection elevates the desirable aesthetics of this slab material by accentuating the movement & tonal variations seen in the original product. By creating a range of 3 colours all available in large sized tiles, the versatility and practicality of this contemporary floor covering is assured. At just 9mm thick, all 3 tile sizes can be utilised on walls as well as floors. Create modern bathrooms by stacking the fabulous 120cm x 60cm either portrait or landscape. Alternatively, be brave & big with the huge 120cm x 120cm, just make sure your walls are tall enough to give it room to shine! Of course these large format Italian made porcelain tiles look fantastic on the floor and you certainly can’t go wrong choosing any of the colours from our LAB range to build you modern interior scheme upon. Pair with slashes of strong, solid primary or secondary colours and you will create gorgeous, contemporary environments that enthral.  With a dedicated 20mm external version available in the 120cm x 60cm slab in Ash & Taupe, creating that uninterrupted flow from inside to out is a must.

PRICES EXCLUDE DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 6boxes on this product. Pack sizes are listed under the specification tab along with further information on this smooth concrete look porcelain floor.

20mm EXTERNAL OPTION: available to pre-order in Ash & Taupe. Tile size is 120cm x 60cm. Lead time as above and MOQ is 30boxes (21.6sqm). More information is given under the specification tab.


Product Details
Box Size 80cm x 80cm: 2tiles / 1.28sqm per box | 120cm x 60cm: 2tiles / 1.44sqm per box | 120cm x 120cm: 2tiles / 2.88sqm per box
Box Weight 80x80: 25kg per box | 120x60: 28kg per box | 120x120: 56.16kg per box
Boxes Per Pallet 80x80: 38boxes (48.64sqm) per pallet | 120x60: 30boxes (43.2sqm) per pallet | 120x120: 17boxes (48.96sqm) per pallet
Technical
Grade Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors
Installation Points Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond when installing large rectangular tiles.
Blending Shade and colour variation should be expected in our ‘natural’ look porcelain products. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. A good number of packs should be opened at a time and blended.
Accessories
Popular Grout Colours PEARL: Ardex FS Fresh Snowdrop - Dove Grey - Silver Shimmer - Rocatex Ultimate Limestone - Silver Grey - Cement Grey | ASH: Rocatex Ultimate Silver Grey - Cement Grey - Anthracite - Ardex FS Dove Grey - SIlver Shimmer - Cast Iron | TAUPE: Rocatex Ultimate Cement Grey - Limestone - Anthracite - Ardex FS Dove Grey - Cast Iron
Recommended Sealer Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc
Anti-Slip Option 10mm A 9mm thick R11 anti-slip version for commercial floors is available to order in all 3 colours in the tile size of 60cm x 60cm. Minimum order quantity of 43.2sqm applies. Price on application.
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.
External Anti-Slip Option 20mm An External R11 Anti-Slip 20mm thick option is available to order in TAUPE or ASH. Tile size is 120cm x 60cm x 2.0cm. This can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self levelling pedestals. Lead times apply. A minimum order quantity of 30boxes (21.6sqm) applies.

Write a review

Please login or register to review
FOLLOW US