Enter the SQM of your room to calculateM2
Prices include VAT
ORDER up to 4 cut samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
NOW REDUCED TO £49sqm+VAT & DELIVERY (previously £59sqm+VAT)
Crafted from classic grade European oak – offering more natural characteristics such as knots and subtle colour variation within and between boards – this classic oak flooring has been finished using a super-smooth brush and pure white oil to delicately emphasise & elevate its natural beauty. This oiled oak flooring is ideal for anyone looking for light wood floors to make an impact and last for years. The pale tones coupled with the finish of this engineered board bounce light & give rooms a sense of space and air. Sold in packs of four planks, each measuring 2200mm (L) x 220mm (W) this oak engineered flooring is 20mm thick with a solid oak surface of 4mm and a ply back of 16mm.
PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 6 boxes (11.616sqm) on this product. Pack size is listed under the specification tab along with further information on this classic grade oak floor.
|Pack Size 220x2200x20/4||4 planks per pack. Pack size is 1.936sqm equating to per sqm REDUCED price of £49.00+VAT.|
|Weight||15.39kg per sqm|
|Pack Weight||29kg per pack|
|Packs Per Pallet||30 packs per pallet|
|Board Thickness||20mm thick board, 16mm ply back 4mm oak top layer|
|Structural Board 20mm Format||This is a 20mm thick board so can be laid directly on joists using an appropriate fixing mechanism.|
|Grade||CLASSIC GRADE: Classic Grade wood exhibits the natural variation of timber without or with much less of the more characterful features in Natural & Rustic Grade. Boards with very few knots are mixed with some that contain larger knots or checks which may be filled. The colour variation from heartwood to sapwood is to be expected but to a lesser degree.|
|Blending||Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.|
|Glue-Down||We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.|
|Floating||Glue-down method is not appropriate for sub-floors that are damp, are mixed i.e. timber subfloor combined with concrete/screed sub-floor or have specific requirements such as acoustic deadening. With sub-floors of this type the Floating installation method will likely be proposed by your installer. The boards are not fixed to the sub-floor but instead uses the weight of the floor itself to keep them in place, usually with the use of an underlay between the sub-floor and boards. The tongue & groove would normally be glued in a floating installation. NB: Beswick stone do not provide underlay, glue or any other wood installation product.|