Avignon External Tumbled Limestone
From £50.00 per sqm
Choose Quantity (Sold per sqm and has a minimum quantity of 5 sqm)
Enter the SQM of your room to calculate or qty if known.
Price Note: Delivery cost added at checkout
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
NOW TAKING FLAGSTONE PRE-ORDERS FOR OUR NEXT DELIVERY EXPECTED MID' JUNE 2021
Our popular Avignon limestone finished for external use.
If you are looking for a beautiful Cotswold / bath stone coloured external flag then look no further than our stunning Avignon limestone. In the same 60cm x random length format to compliment our internal Avignon, these flags are 3cm (30mm) thick and finished with an anti-slip finish to provide grip under foot.
PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.
Also available are our Avignon external finish treads (steps). 100cm long x 35cm deep x 5cm thick with the front edge finished with a bullnose profile. Priced per piece at £39each +VAT and delivery. PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£39.00+VAT) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white box labelled SQM (next to the 'Prices include VAT' box) to add correctly to your shopping cart.
Postal samples ARE NOT available for our 5cm thick step treads, the colour and finish is identical to the external flagstone.
|Finish||Gently aged edges & textured, external grade surface|
|Weight||Flagstone: 85kg per sqm | Step Tread: 50kg per step|
|Random Lengths||This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.|
|Step Tread||Unlike flagstones, Step Treads are sold per piece. Avignon step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too.|
|Suitability||Flagstone: Outdoors, Floors | Step Tread: Indoors & Outdoors|
|Installation Points||This is a 30mm thick flag so can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used.|