From £38.00 / M2
Choose Quantity (Sold per box and has a minimum quantity of 4 boxes)
Enter the SQM of your room to calculate or qty if known.
Price Note: Delivery cost added at checkout
Buy More, Save MoreBuy 31 boxes or more for just £71.09 Per Box
Buy 46 boxes or more for just £67.35 Per Box
Buy 61 boxes or more for just £63.61 Per Box
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
SAVE BY TAKING ADVANTAGE OF OUR BULK BUY SAVINGS! WE OFFER THE FOLLOWING ONLINE TIERED DISCOUNTS ON THIS FABULOUS PORCELAIN:
ORDER OVER 50sqm AND SAVE 5% (£36.10sqm+VAT) | ORDER OVER 75sqm AND SAVE 10% (£34.20sqm+VAT) | ORDER OVER 100sqm AND SAVE 15% (£32.30sqm+VAT)
Inspired by antique French limestone, Chateau Porcelain offers both panache and originality. A large format stone effect porcelain tile with authentic variation of colour, movement and texture, subtle veining weaves through the aged limestone look. Available in 4colours: Talco is blessed with a natural complexion of ivory and bone, these gentle hues combine to create a warm and inviting look. Sabbia is a bronzed goddess among Limestone effect floor tiles, Chateau Sabbia is something of a drama queen! Cenere is a gorgeous heady mix of greys, blues & pale charcoals. Abundant in character and with a distinct air of theatricality, brooding bronzed coloured patchwork stone effect porcelain is elegantly finished with an understated pillow edge, creating a majestic historical look. Moka is a dark limestone effect tile rooted in charcoal and ash shades and warmed through with rich tonal highlights, Moka is one of the leading lights of our Chateau range.
Especially well-suited to large kitchens that would benefit from an injection of ‘cosy-but-classy,’ the neutrality of the colour scheme makes Chateau stone effect porcelain extremely versatile, easily adapting to almost any room, corridor or space. As with all Beswick Stone products, our promise of tiles that are hard-wearing and easy to maintain holds true.
We operate a minimum order quantity of 5 boxes (8.205sqm) on this flagstone look porcelain tile. Each pack contains 3 tiles equalling 1.641sqm. For popular grout colours and further information on this flagstone look porcelain please refer to the specification tab.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison.
20mm EXTERNAL OPTION: available to pre-order in all 4 colours. Tile size is 90.6cm x 60.4cm. Lead time & MOQS apply. More information is given under the specification tab.
|Box Size||INTERNAL FORMAT: 3 tiles (1.641sqm) per box | EXTERNAL FORMAT: 1 tile (0.5472sqm) per box|
|Box Weight||INTERNAL: 36.5kg per box | EXTERNAL: 25kg per box|
|Boxes Per Pallet||INTERNAL: 32boxes (52.512sqm) per pallet | EXTERNAL: 48boxes (26.256sqm) per pallet|
|Grade||INTERNAL: Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors | EXTERNAL 20mm: R11 - Residential exterior | Commercial interior & exterior|
|Installation Points||Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond.|
|Blending||Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.|
|External Installation Points||External formats are 20mm thick so can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR or SBR used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used.|
|Popular Grout Colours||TALCO: Rocatex Utimate Silver Grey - Jasmine - Grey Beige | SABBIA: Rocatex Ultimate Almond - Dark Grey - Anthracite | MOKA: Rocatex Ultimate Cement Grey - Dark Grey - Anthracite | CENERE: Ardex FS Dove Grey - Rocatex Ultimate Cement Grey - Anthractie|
|Recommended Sealer||Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc|
|Anti-Slip Option 10mm||An R11 Anti-Slip option is available to order in all colours. Tile size is 90.6cm x 60.4cm x 1cm. If used outdoors this must be installed on a solid concrete/screed base. Lead times & MOQs apply.|
|Recommended Adhesive||EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.|
|External Anti-Slip Option 20mm||An External R11 Anti-Slip 20mm thick option is available to order in all 4 colours. Tile size is 90.6cm x 60.4cm x 2.0cm. This can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self-levelling pedestals. Lead times apply. A minimum order quantity of 26.256sqm applies.|