Product Code: P/DOCIO Availability: In Stock
P/DOCIO

Doc Indoor Outdoor Porcelain

From £42.00 / M2

Choose Colour

Beige

Change Colour x

(Sold per box and has a minimum quantity of 5 boxes)

0
M2
Qty of boxes
(Total coverage: 0 sqm)

0 Boxes

(Total coverage: 0 sqm)
£42.00 /boxesinc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

Doc porcelain is a great range of Italian aged stone look porcelain at really good prices. With dedicated internal, external and indoor-outdoor anti-slip options available in large 90cm x 60cm tiles, Doc is a hugely versatile range. Perfect for all residential and commercial schemes and different installation specifications.. Doc porcelain is available in 3 authentic stone colours further enhancing the limestone aesthetic of this handsome tile. Beige is our most popular colour, warm golden-sandy hues combine with natural stone movement creating a very proper stone looking tiled floor. Ivory is proving very popular for the uninterrupted inside to outside flow and is light & charming tile with character aplenty. Grey is based on the ever popular blue-grey tones of northern european limestone, a colour of panache & dash for certain.

Tile formats:
- Standard R10 10mm thick internal format: A fabulous aged stone effect porcelain tile for use in both residential and commercial interiors, finished with an authentic looking aged edge. Minimum order quantity (MOQ): 5boxes (8.1sqm) – usually from stock

- Anti-slip R11 10mm thick indoor/outdoor format: This pre-order* format can be used internally and externally. For indoor use, the textured R11 tile is usually the preferred finish in commercial interiors where a higher grip is required. It is also commonly used in wet-rooms and indoor pool surrounds in both residential and commercial schemes for the same reason. This 10mm thick tile can also be used externally when installed onto a solid base such as concrete or a sand & cement screed. MOQ: 32boxes (51.84sqm) – pre-order* product

- Dedicated R11 20mm thick external format: The dedicated 20mm external tile pre-order* format in Doc is available with an aged edge as per its internal counterpart. Being a dedicated outdoor tile, this can be installed onto standard patio base or via a dry raised/floating installation using fixed or self-levelling pedestals.
Specific installation guidelines for all 3 options can be found under the specification tab. MOQ: 45boxes (24.3qm) – pre-order* product

*LEAD TIME FOR PRE-ORDER PRODUCTS IS APPROXIMATELY 4-5 WEEKS: this is an estimate only and is based on the supplier having stock available. Please call us now on 01285 885795 to confirm availability and lead time.

PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison.

KERBSIDE DELIVERY INFORMATION

Product Details
Box Size INTERNAL R10 & INDOOR/OUTDOOR R11 FORMAT: 3tiles / 1.62sqm per box | 20mm EXTERNAL FORMAT: 1tile / 0.54sqm per box
Box Weight INTERNAL R10 & INDOOR OUTDOOR R11 FORMAT: 35.3kg | 20mm EXTERNAL FORMAT: 24kg
Boxes Per Pallet INTERNAL R10 & INDOOR OUTDOOR R11 FORMAT: 27boxes (43.74sqm) per pallet - based on network palletways delivery | 32boxes (51.84sqm) per pallet - based on hi-ab delivery (extra costs may apply) | 20mm EXTERNAL FORMAT: 40boxes (21.6sqm) per pallet - based on network palletways delivery | 45boxes (24.3sqm) per pallet - based on hi-ab delivery (extra costs may apply) Please call us on 01285 885795 for confirmation of delivery costs.
Technical
Grade Internal Format Wall & Floor R10 - Residential interior walls & floors | Commercial interior walls & floors
Grade R11 Indoor Outdoor 10mm Format INDOOR USE: Anti-slip R11 Rectified - Residential interior floors particularly wet-rooms and swimming pool surrounds | Commercial interior floors | OUTDOOR USE: Anti-slip R11 Rectified - Residental & Commercial exterior floors when installed onto a solid concrete/screed base.
Grade 20mm External Format Outdoor / Rectified - R11 - Residential & Commercial.
Indoor Installation Points Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout (we offer Rocatex Ultimate & Ardex FS grout). For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond.
Indoor Outdoor Installation Points Installation for indoors & outdoors is exactly the same and will only differ when there is underfloor heating internally. Large format porcelain tiles should be installed with a good quality S1 external grade flexible adhesive and a fine grain grout suitable for external use* (we offer Rocatex Ultimate & Ardex FS grout). For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. *Alternatively, for outdoor use a brush-in resin compound or epoxy grout is often preferred - Beswickstone do not offer these alternatives.
External Installation Points External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self-levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method.
Blending Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.
Accessories
Popular Grout Colours BEIGE: Ardex* Classic Vanilla - Rocatex Ultimate Almond - Clay | IVORY: Rocatex Ultimate Silver Grey - Limestone - Cement Grey | GREY: Rocatex Ultimate Light Grey - Silver Grey - Limestone - Ardex* Silver Shimmer | *we suggest Ardex FS grout for internal format & Ardex FL grout for external format
Recommended Sealer Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts when used externally and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc.
Recommended Adhesive Single Part Rapid Set S1 Flexible Grey Adhesive 20kg - when installing on a solid concrete/cement/screed base both internally & externally.

Write a review

Please login or register to review
FOLLOW US