Pewter Hand-Cut Flagstone
From £46.80 per sqm
(Sold per sqm and has a minimum quantity of 5 sqm)
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
DISCOUNTED PRICE OF JUST £39sqm+VAT (reduced from £49)
A fabulous edition to our Grey limestone collection Pewter is an indoor, outdoor limestone available in large 60cm wide flags. These super durable limestone tiles are mostly mid to dark grey in tone with a very attractive textured finish remiscent of hand cut slate. In our Pewter flagstone flooring you will find minimally aged edges, as well as interesting surface distinctions enhanced by the varied textures found in this great limestone floor . This means these large flagstones suit modern and classic interiors alike – whether it’s a chic urban oasis or a traditional country kitchen. Known for their highly durable nature, Pewter limestone tiles will enhance your home for years to come. For a timeless result, lay in an off-set brick bond pattern. These stones come in random lengths, so you can create a unique look. The wonderful colour palette in Pewter ranges from pale grey, through mid blue grey to slightly darker flags. Be thoughtful when laying and blend the different tones to create a harmonious and beautiful floor.
PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.
|Finish||Minimally aged edges & textured surface|
|Weight||55kg - 58kg per sqm|
|Random Lengths||This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.|
|Suitability||Indoors & Outdoors, Floors|
|Indoor Installation Points||These large format natural stone tiles should be installed with a good quality S1 grade grey flexible adhesive and a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout). Decoupling mat is recommended for all heated-floors and/or timber sub-floors. Adhesive specification for timber sub-floors must be a good quality S2 grade adhesive. This stone must be sealed with either a good quality solvent based or water based sealer (we offer Lithofin MN Stainstop, Rocatex Natural Finish & Rocatex C-10 Water Based sealers).|
|External Installation Points||This is 22mm thick flag can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used.|
|Popular Grout Colours||Ardex FL: Natural Almond - Silver Shimmer - Cast Iron|
|Recommended Sealer||Rocatex C-10 Water Based Ultimate Sealer|
|Recommended Adhesive||EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.|