Product Code: StoneREGIO Availability: In Stock

Regent Indoor Outdoor Limestone

From £40.80 / M2

(Sold per and has a minimum quantity of 5 )

Qty of
(Total coverage: 0 sqm)


(Total coverage: 0 sqm)
£40.80inc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

Regent is a hugely popular limestone flagstone for use both indoors and out. This highly fossilised natural stone, with hues of mushroom and fawn, is packed with stunning natural detail – including full shell fossils, abundant dark-lead mineral veins and glimmers of grey quartz. Regent Limestone creates a timeless natural flagstone floor that will never date and we have a dedicated outdoor version for a truly seamless look that blends house and garden. A popular choice for both traditional and contemporary projects. Regent limestone is a beautiful pale taupe-beige limestone, very similar to traditional Purbeck limestone with the same high fossil & shell content. Regent is a more mushroom coloured floor than our Avignon & Castile stones, so is very popular where a deeper, darker natural stone aesthetic is desired. Regent is a very dense stone making it highly suitable for even the busiest family homes or commercial projects.

The external format is finished with the same gently aged edge and comes in a dedicated 30mm thick flag. The surface of the stone is etched to give this external tile a higher-grip. Our Regent step tread is also finished with this same higher-grip surface and one 100cm side is fully bullnosed.

PRICES* ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.

*PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£39.00+VAT) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white Order by SQM box to add correctly to your shopping cart.

Postal samples ARE NOT available for our 5cm thick step treads, the colour and finish is identical to the external flagstone.



Product Details
Material Limestone
Internal Finish Gently aged edges & smooth surface
External Finish Gently aged edges & etched, high-grip surface.
Weight 15mm: 42kg per sqm | 20mm: 55kg per sqm | 30mm: 85kg per sqm | Step Tread: 50kg per step
Random Lengths This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.
Step Tread Unlike flagstones, Step Treads are sold per piece. Regent step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too. The surface finish is the same as the external flagstone i.e. high-grip external grade surface
Suitability INTERNAL 60cm x Random Lengths x 1.5/2.0cm FORMAT: Indoor, Floors. | EXTERNAL 60cm x Random Lengths x 3.0cm FORMAT: Outdoor, Floors. | Step Tread: Indoors & Outdoors
Indoor Installation Points These large format natural stone tiles should be installed with a good quality S1 grade WHITE flexible adhesive and a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout). Decoupling mat is recommended for all heated-floors and/or timber sub-floors. Adhesive specification for timber sub-floors must be a good quality S2 grade WHITE adhesive. This stone must be sealed with either a good quality solvent based or water based sealer (we offer Lithofin MN Stainstop, Rocatex Natural Finish & Rocatex C-10 Water Based sealers).
External Installation Points This is a 30mm thick flag so can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used.
Popular Grout Colours Ardex FL: Natural Almond
Recommended Sealer Rocatex Natural Finish Sealer or Lithofin MN Stain Stop
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible White Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review