Lodge Noce Timber Porcelain
From £29.00 / M2
Choose Quantity (Sold per box and has a minimum quantity of 6 boxes)
Enter the SQM of your room to calculate or qty if known.
Price Note: Delivery cost added at checkout
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
GORGEOUS NEW TIMBER LOOK PORCELAIN AVAILABLE FOR PRE-ORDER*. RRP £36sqm+VAT OFFERED AT JUST £29 sqm+VAT
Lodge Noce is a dark wood timber look porcelain tile based on stunning dark Walnut. This Italian made porcelain tile is 120cm long by 20cm wide – replicating lovely wide wooden floors within a length format that makes it eminently suitable for both large and small areas of the home. Porcelain tiles are not just for bathrooms anymore – their hard-wearing nature and mimicry of beautiful natural products such as stone and wood now make them a genuinely beautiful yet low maintenance choice for any room in the house including hard-working kitchens, cosy living areas and beyond. The deep, rich walnut tones of Lodge Noce creates a fabulous floor, full of real wood characteristics such as grain and knots. Pair with bold coloured furniture for a real design statement.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 6 boxes (8.46sqm) on this product. Each box contains 6 tiles equalling 1.41sqm. For popular grout colours and further information on this timber look porcelain please refer to the specification tab.
A 10mm anti-slip version in the same size as the internal tile of 120cm x 20cm to allow you to create that seamless inside outside transition. This has a minimum order quantity of 1pallet (36sqm). Price for this external/anti-slip option is £29sqm+VAT & delivery. Please call us on 01285 885795 to place your order.
*NB: THIS IS A PRE-ORDER ITEM. THIS NEW PRODUCT HAS AN ESTIMATED DELIVERY TIME OF 4WEEKS FROM ORDER.
|Box Size||6 tiles (1.41sqm) per box|
|Box Weight||30.5kg per box|
|Boxes Per Pallet||30boxes / 42.3sqm per pallet|
|Grade||Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors|
|Installation Points||Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout.|
|Blending||Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.|
|Popular Grout Colours||Ardex FS Cast Iron - Dove Grey | Rocatex Ultimate Anthracite - Cement Grey|
|Recommended Sealer||Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc|
|Anti-Slip Option 10mm||An R11 Anti-Slip 10mm thick option is available to order. Tile size is 120cm x 20cm x 1cm. If used outdoors this must be installed on a solid concrete/screed base. Lead times & MOQs apply.|
|Recommended Adhesive||EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.|