Natural Oiled Scorched Edge Engineered Oak Code 704
From £66.00 / M2
(Sold per pack and has a minimum quantity of 6 packs)
0 Packs(Total coverage: 0 sqm)
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Timeless and classic, natural oiled to give the traditional look of a classic oak plank flooring with a stunning scorched edge giving a historical twist to this fabulous oak floor.
One of our most popular boards and it is not difficult to see why! This stunning 22cm wide engineered oak board goes through a scorching process resulting in a wonderful ‘blackened’ or scorched edge harkening back to well-trodden oak floors that have seen plenty of life. This pale oak floor is finished with a modern hardwax oil keeping the oak close to its raw colour producing a timeless floor that gives that desired unfinished look and colour. Due to the grade of oak, the hardwax oil and the scorched edge, this versatile oak floor really can suit any period of property or space. From old country houses through to bang up to date modern builds or extensions, our Natural Scorched Oak will make a beautiful addition to your home. Available in 2200mm (L) x 220mm (W) x 20mm (D).
PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 6 boxes (11.616sqm) on this product. Pack size is listed under the specification tab along with further information on this classic grade oak floor.
ALSO AVAILABLE IN A SUPERB LARGE PARQUET HERRINGBONE FORMAT - 600mm x 125mm x 20mm CLICK FOR HERRINGBONE
|Pack Size 220x2200x20/4||4 planks per pack. Pack size is 1.936sqm equating to per sqm price of £55.00+VAT.|
|Weight||15.39kg per sqm|
|Pack Weight||30kg per pack|
|Packs Per Pallet||30 packs per pallet|
|Board Thickness||20mm thick board, 16mm ply back 4mm oak top layer|
|Finishing Oil||LOBA Hardwax Oil|
|Structural Board 20mm Format||This is a 20mm thick board so can be laid directly on joists using an appropriate fixing mechanism.|
|Grade||CLASSIC GRADE: Classic Grade wood exhibits the natural variation of timber without or with much less of the more characterful features in Natural & Rustic Grade. Boards with very few knots are mixed with some that contain larger knots or checks which may be filled. The colour variation from heartwood to sapwood is to be expected but to a lesser degree.|
|Glue-Down||We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.|
|Floating||Glue-down method is not appropriate for sub-floors that are damp, are mixed i.e. timber subfloor combined with concrete/screed sub-floor or have specific requirements such as acoustic deadening. With sub-floors of this type the Floating installation method will likely be proposed by your installer. The boards are not fixed to the sub-floor but instead uses the weight of the floor itself to keep them in place, usually with the use of an underlay between the sub-floor and boards. The tongue & groove would normally be glued in a floating installation. NB: Beswick stone do not provide underlay, glue or any other wood installation product.|
|Blending||Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.|