Product Code: P/HWPT Availability: Pre-Order

Hot White Porcelain

From £34.00 / M2

Choose Quantity (Sold per box and has a minimum quantity of 5 boxes)

0

Enter the SQM of your room to calculate or qty if known.

Or

(Total coverage: 0 sqm)

Price Note: Delivery cost added at checkout

£48.00 £44.06 /boxesinc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

TOP SELLER!

TILE FORMATS NOW REDUCED SAVING OVER 15%!

Eminently chic and cooler than an ice-cold glass of champagne on a blistering summer’s day, our Hot White Porcelain tile is a nod to the rare magnificence of Iranian limestone-marble. Suggestive of a Middle Eastern splendour that lends itself to being dressed with neutral furnishings to create a glamorous and serene retreat; conversely if you are bold with colour then prepare to let your imagination run vivid and wild! Hardwearing and easy to clean this beautiful porcelain floor and wall covering is pale and extremely interesting. Available in 90cm x 45cm and 60cm x 30cm and complimented by a lovely 5cm x 5cm square mosaic.

PLEASE NOTE: Mosaics are sold PER SHEET so the price above (£11.52inc VAT) is for one 30cm x 30cm sheet. Just enter the total number of mosaic sheets you require into the white box labelled SQM (next to the 'Prices include VAT' box) to add correctly to your shopping cart.

Design Tip: For added wow, jazz up by combining with our magical Zultan Turquoise or Aquamarina Decor brick tile - a magnificent combination.

PRICES EXCLUDE DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order quantity of five boxes on this product. Box sizes are listed under the specification tab along with further information on this stone look porcelain floor.


KERBSIDE DELIVERY INFORMATION

Product Details
Box Size 60cm x 30cm format: 1.08sqm per box | 90cm x 45cm format: 1.215sqm per box
Box Weight 60 x 30: 25kg per box | 90 x 45: 28.7kg per box
Boxes Per Pallet 60 x 30: 40 boxes (43.2sqm) per pallet | 90 x 45: 30 boxes (36.45sqm) per pallet
Mosaic Unlike tiles Mosaics are sold per sheet. Hot White Porcelain Mosaic is supplied on a mesh-backed sheet measuring 30cm x 30cm which can be cut using a stanley knife. Each sheet is made up of 36number 5cm squares, 6squares high by 6squares wide. This is rectified porcelain suitable for use on walls and floors. Due to mosaic production methods, slight shade and dimensional variation is to be expected within the mosaic sheet.
Technical
Grade Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors
Installation Points Porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used.
Blending Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.
Mosaic Installation Mosaics can be a challenge to install. The mesh backing makes it hard to get even pressure when pressing into adhesive so you end up with an uneven surface and, when used against normal tiles, lipping can occur for this reason too. We recommend the use of Mosaic Mesh Tile Backer Sheets which makes mosaic installation MUCH easier. These are available from most DIY sheds.
Accessories
Popular Grout Colours Rocatex Ultimate: Silver Grey - Limestone - Jasmine - Almond
Recommended Sealer Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc
Anti-Slip Option 10mm An R11 Anti-Slip 10mm thick option is available to order. Tile size is 60cm x 60cm x 1cm. If used outdoors this must be installed on a solid concrete/screed base. Lead times & MOQs apply.
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review