From £32.00 / M2
Choose Quantity (Sold per box and has a minimum quantity of 4 boxes)
Enter the SQM of your room to calculate or qty if known.
Price Note: Delivery cost added at checkout
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
NOW REDUCED FROM £43sqm+VAT TO £32sqm+VAT
The Doc range is a slightly tumbled tile with worn edges. Warm tones give the surface of this tile a vibrant sheen, whilst subtle detail allows a gentle variation of colour to create a sophisticated floor space. Doc Beige introduces terracotta hints to the range, light oranges and pale browns softly sweep across the tiles to create beautiful interior flooring. Doc Ivory is cool as ice, pale silver greys are beautifully highlighted by darker blue-grey 'fossil' and 'quartz' detail as seen in the real limestone. Doc Grey is the darkest of the range, bringing smoky marbled streaks to the surface of the tile. All 3 colours offer exceptional value for money now reduced to just £32sqm+VAT and delivery. These are high grade, Italian porcelain tiles, immensely durable and stain-proof.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 4 boxes (6.48sqm). Each pack contains 3 tiles equalling 1.62sqm. For popular grout colours and further information on this flagstone look porcelain please refer to the specification tab.
20mm EXTERNAL OPTION: available in all colours in 90cm x 60cm. More information is given under the specification tab.
|Box Size||3tiles / 1.62sqm per box|
|Box Weight||38kg per box|
|Boxes Per Pallet||32 boxes (51.84sqm) per pallet|
|Grade||Walls & Floors R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors|
|Installation Points||Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond.|
|Blending||Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.|
|Popular Grout Colours||BEIGE: Ardex FS Classic Vanilla - Rocatex Ultimate Almond - Clay | IVORY: Rocatex Ultimate Silver Grey - Limestone - Cement Grey | GREY: Rocatex Ultimate Light Grey - Silver Grey - Limestone - Ardex FS Silver Shimmer|
|Recommended Sealer||Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc|
|Anti-Slip Option 10mm||An R11 Anti-Slip 10mm thick option is available to order in all colours. Tile size is 90cm x 60cm x 1cm. If used outdoors this must be installed on a solid concrete/screed base. Lead times & MOQs apply.|
|Recommended Adhesive||EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.|
|External Anti-Slip Option 20mm||An External R11 Anti-Slip 20mm thick option is available to order in all colours. Tile size is 90cm x 60cm x 2.0cm. This can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self levelling pedestals. Lead times apply. A minimum order quantity of 24.3sqm applies. Price per sqm is £49sqm+VAT and delivery.|