Product Code: P/CSEOL Availability: In Stock

Chalk Sunrise Porcelain

From £17.00 / M2

Choose Quantity (Sold per box and has a minimum quantity of 5 boxes)


Enter the SQM of your room to calculate or qty if known.


(Total coverage: 0 sqm)

Price Note: Delivery cost added at checkout

£20.40 /boxesinc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.


A very lovely pale - chalky - porcelain tile in soft orange & golden "sunny" tones. Available in a fabulous 2.5cm x 2.5cm mosaic which is super elegant in bathrooms and wet-rooms. We have the perfect tile size for bathrooms which is the elongated rectangle size of 80cm x 40cm. This is perfect for larger expanses of walls and floors. Tie both the tile and the mosaic into a perfectly balanced interior scheme that looks amazing and get both at massively reduced prices!

Mosaic 30cm x 30cm sheet reduced from £10.99+VAT to just £6.15+VAT

80cm x 40cm x 1cm tile reduced from £39sqm+VAT to just £22sqm+VAT


PLEASE NOTE: Mosaics are sold PER SHEET so the price above (£7.38inc VAT) is for one 30cm x 30cm sheet. Just enter the total number of mosaic sheets you require into the white box labelled SQM (next to the 'Prices include VAT' box) to add correctly to your shopping cart.

PRICES EXCLUDE DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order quantity of five boxes on this EOL product. Box sizes are listed under the specification tab along with further information on this stone look porcelain floor.

Product Details
Box Size 8.6cm x 35cm: 20tiles / 0.6sqm per box | 80cm x 40cm: 3tiles / 0.96sqm
Box Weight 8.6cm x 35cm: 14kg per box | 80cmx 40cm: 25kg per box
Mosaic Unlike tiles Mosaics are sold per sheet. Chalk Sunrise Porcelain Mosaic is supplied on a mesh-backed sheet measuring 30cm x 30cm which can be cut using a stanley knife. Each sheet is made up of 2.5cm x 2.5cm squares. This is rectified porcelain suitable for use on walls and floors. Due to mosaic production methods, slight shade and dimensional variation is to be expected within the mosaic sheet.
Grade Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors
Installation Points Porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used.
Blending Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.
Mosaic Installation Mosaics can be a challenge to install. The mesh backing makes it hard to get even pressure when pressing into adhesive so you end up with an uneven surface and, when used against normal tiles, lipping can occur for this reason too. We recommend the use of Mosaic Mesh Tile Backer Sheets which makes mosaic installation MUCH easier. These are available from most DIY sheds.
Popular Grout Colours Ardex FS Classic Vanilla
Recommended Sealer Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review
Tags: bargain, cheap, offers,