Product Code: S/CBFS Availability: In Stock
S/CBFS

Cathedral Flagstone

From £38.40 per sqm

(Sold per sqm and has a minimum quantity of 5 sqm)

0
M2
Qty of sqm

0 SQM

£38.40 /sqminc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

A rich, dark authentic limestone flagstone that will form the centrepiece of any interior scheme. Our Cathedral Flagstone produces a stunning flagstone floor, full of drama and character. This real limestone is very strong so is perfect for busy rooms such as kitchens, hallways, heavily used family spaces and the like. The large size flags - 60cm in width and up to 90cm long - look equally at home is massive open plan spaces or more cosy, romantic snugs. This versatile stone can even be extended to outside onto terraces etc to create that seamless inside to outside look so desired nowadays.

This beautiful Black limestone flag has been mechanically brushed on the surface producing an exquisite, sensitive finish reminiscent of crushed velvet. The brushing is done freely so the result is a wonderful tactile surface of smooth and more textured areas which catch the light differently creating a visually dynamic and arresting flagstone floor. Coupled with an aged edge, Cathedral Flagstone creates a real limestone floor full of depth and character all within a timeless finish. 

Design Tip: Pair with pale sheep-skin look rugs to soften and elevate this brooding masterpiece.

PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.

CLICK HERE TO VIEW THE LAYING PATTERN (PDF)

KERBSIDE DELIVERY INFORMATION (WEB PAGE)

Product Details
Material Limestone
Finish Hand cut edges & brushed and textured surface
Weight 55kg - 58kg per sqm
Random Lengths This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.
Technical
Suitability Indoors & Outdoors, Floors
Indoor Installation Points These large format natural stone tiles should be installed with a good quality S1 grade WHITE flexible adhesive and a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout). Decoupling mat is recommended for all heated-floors and/or timber sub-floors. Adhesive specification for timber sub-floors must be a good quality S2 grade WHITE adhesive. This stone must be sealed with either a good quality solvent based or water-based sealer (we offer Lithofin MN Stainstop, Rocatex Natural Finish & Rocatex C-10 Water Based sealers).
External Installation Points This 22mm thick flag can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used.
Accessories
Popular Grout Colours Ardex FL: Natural Almond - Dove Grey - Cast Iron
Recommended Sealer INTERNALLY: Rocatex Natural Finish Sealer | EXTERNALLY (if required): Lithofin MN Colour Intensifier
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review
FOLLOW US