Enter the SQM of your room to calculateM2
Prices include VAT
ORDER up to 4 cut samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Inspired by ancient York slabs this deep grey flooring will add character to your living space. It has a distinct aged appearance, evocative of church paths glistening in the rain. These uniquely textured large format tiles (56cm x 70cm, 80cm & 84cm lengths) can be used indoors and outside. The final two images on this page show the unsealed stone, as if it’s been laid externally. For internal projects, seal the surface with Lithofin Multi Seal – this will strengthen its colour and add stain resistance. PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.
Also available are our Old York external finish treads (steps). 100cm long x 35cm deep x 5cm thick with the front edge finished with a bullnose profile. Priced per piece at £35each +VAT and delivery. PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£35.00) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white box labelled SQM (next to the 'Prices include VAT' box) to add correctly to your shopping cart.
Postal samples ARE NOT available for our 5cm thick step treads, the colour and finish is identical to the flagstone.
|Weight||55kg - 58kg per sqm|
|Random Lengths||This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect. This stone comes in 3 mixed lengths: 70cm, 80cm & 84cm.|
|Step Tread||Unlike flagstones, Step Treads are sold per piece. Old York step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too.|
|Suitability||Indoors & Outdoors, Floors|
|Installation Points||When laying internally this limestone can be installed with a good quality grey adhesive. Flexibility and full specification will depend on the age and type of your sub-floor.|
|External Installation Points||This is 22mm thick flag can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used.|
|Popular Grout Colours||Ardex FL: Natural Almond - Rocatex Ultimate: Light Grey|
|Recommended Sealer||INTERNALLY: Lithofin Multiseal | EXTERNALLY (if required): Lithofin MN Colour Intensifier|
|Recommended Adhesive||EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.|