RECOMMENDED USE: for fixing decoupling mat / porcelain / natural stones to timber sub-surfaces. More information is included under the specification tab and in the Technical download.
Single Part White Rapid Set Highly Flexible Adhesive for porcelain tiles & natural stone, 20kg.
ROCATEX C2FT S2 Ultimate Rapid Flex White is a single part, highly flexible, rapid setting wall and floor tile adhesive for fixing natural stone and tiles including ceramics, porcelain and mosaics to a variety of substrates. Suitable for interior and exterior use, also as a fast track solution for green screeds. Suitable for use on anhydrite screeds, concrete screeds, power floated concrete, sand & cement screeds, brick/blockwork, gypsum plaster, plaster boards, plywood, tongue & groove boards/floorboards, chipboard, cement based tile backer boards, existing tiles and other non-porous substrates, metal, flooring grade asphalt, epoxy damp proof membranes, underfloor heating.
- 1-20mm Bed Thickness
- 45 Mins Pot Life
- 3 Hours Set Time
- Interior / Exterior
- Ceramic / Porcelain / Mosaics
- Natural Stones / Flagstones
- Screeds / Timber / Chipboard
- Underfloor Heating
- Swimming Pools / Wet Areas
- Ultimate Grab
- Slip Resistant
- Water Resistant
- Frost Resistant
*Average Coverage: our calculator is based on the average coverage of 3.5sqm, this assumes a level sub-surface and is based on 15 to 20mm thick stone. Additional information on coverage can be found under the specification tab which will allow you to adjust your quantities as required.
|Material Type||Powder Cement Base Adhesive|
|Storage||Store unopened, clear of the ground, in a cool, dry, frost free environment.|
|Average Coverage||10mm Porcelain: 5 to 5.3sqm | 12mm Stone: 4 to 4.5sqm | 15mm Stone: 3.5 to 4sqm | 20mm stone: 3 to 3.5sqm|
|Suitability||Floors, Walls, Internal, External|
|Recommended Use||FLOORS: All porcelain & all natural stone floor tiles on all timber sub-surfaces & floating floors | For installation of decoupling mat on all timber sub-surfaces|