Product Code: OakVHW Availability: In Stock

Vinnie Hard Waxed Engineered Oak Flooring

From £49.00 / M2

Choose Oak Sizes

2200mm x 220mm x 15/4mm

Choose Quantity (Sold per pack and has a minimum quantity of 6 packs)

0

Enter the SQM of your room to calculate or qty if known.

Or

(Total coverage: 0 sqm)

Price Note: Delivery cost added at checkout

£58.80 /packsinc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

NEW FORMAT NOW IN STOCK IN THIS DARK, RESPLENDENT OAK. AVAILABLE TO ORDER NOW AT THE KNOCKOUT PRICE OF £49sqm+VAT & DELIVERY!

Vinnie is a stunning, warm, dark honey-hued oak with a Vintage look. 

This sumptuous hardwood flooring, consisting of hard-waxed engineered oak boards, is far from middle-of-the-road. Sure to add a warming finish to your home, this charming select grade oak flooring with subtle colour variations has been hard-waxed to create a hard-wearing finish with a more natural look that easily bridges from rustic through to contemporary. Each plank of Vinnie engineered oak flooring measures 2200mm (L) x 220mm (W) and is 15mm thick – 4mm solid oak surface with an 11mm birch ply back. Bevelled on all four sides, the hard-waxed oak flooring boards, some of which have been machined into two sections for a more traditional look, fit together via tongue and groove producing a tremendous oak floor of depth & luxury.

PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 5 boxes (14.52sqm) on this product. Pack size is listed under the specification tab along with further information on the classic grade oak floor.

 
Product Details
Weight 11.542kg per sqm
Pack Weight 34kg per pack
Packs Per Pallet 28 packs per pallet
Board Thickness 15mm thick board, 11mm ply back 4mm oak top layer
Pack Size 6 planks per pack. Pack size is 2.904sqm equating to per sqm price of £49.00+VAT.
Technical
Grade CLASSIC GRADE: Classic Grade wood exhibits the natural variation of timber without or with much less of the more characterful features in Natural & Rustic Grade. Boards with very few knots are mixed with some that contain larger knots or checks which may be filled. The colour variation from heartwood to sapwood is to be expected but to a lesser degree.
Blending Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended.
Glue-Down We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply.
Floating Glue-down method is not appropriate for sub-floors that are damp, are mixed i.e. timber subfloor combined with concrete/screed sub-floor or have specific requirements such as acoustic deadening. With sub-floors of this type the Floating installation method will likely be proposed by your installer. The boards are not fixed to the sub-floor but instead uses the weight of the floor itself to keep them in place, usually with the use of an underlay between the sub-floor and boards. The tongue & groove would normally be glued in a floating installation. NB: Beswick stone do not provide underlay, glue or any other wood installation product.

Write a review

Please login or register to review