From £33.00 / M2
Choose Quantity (Sold per box and has a minimum quantity of 5 boxes)
Enter the SQM of your room to calculate or qty if known.
Price Note: Delivery cost added at checkout
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
REDUCED FROM £39sqm+VAT TO £33sqm+VAT
120CM x 60CM BEIGE NOW IN STOCK
ZONE CONTEMPORARY STONE LOOK PORCELAIN AVAILABLE FOR PRE-ORDER. APPROX. ORDER TIME OF 4 WEEKS.
This isn’t your usual take on industrial chic; based on
smooth cement finish floors but with the added interest of natural stone zest, Zone comes in four colours and none of them is your
dull, lifeless concrete colour. Choose from warm and mottled Zone Beige, with its
almost limestone characteristics, the large 90cm x 90cm or 120cm x 60cm tiles adds life,
character and warmth to any interior scheme. Or plump for ultra-urban cool Zone
White, a stunning ice-white colour with pale blue-grey mottling, enhancing the
interest of this very on-trend tile. Next is Zone Grey which emanates industrial coolness & charm, perfect for loft living or stylised agricultural conversions! Finally, is the hugely popular Zone Zinc, an awesome dark grey tile full of gravitas and charm. The large square or rectangle tile shape perfectly
replicates large industrial slab floors, when combined with out of the box colour
choices, Zone porcelain produces a very modern interpretation for use in many
different interior design schemes. Go all white with Zone White and add flashes
of aquamarine and turquoise for a modern art-deco inspired interior twist. Pair
Zone Beige with touches of bright red and orange to bring the warmth of the
Mediterranean – think saffron and spice. Team Zone Grey or Zone Zinc with exposed red brick walls for that Soho look. At the amazing price of just
£33sqm+VAT, Zone porcelain is fabulous tile at a fabulous price.
PRICES EXCLUDE DELIVERY. We operate a minimum order of 5 boxes on this product. Box sizes are listed under the specification tab.
20mm EXTERNAL OPTION: available to pre-order in GREY or ZINC. Tile size is 90cm x 90cm. More information is given under the specification tab.
|Box Size||90cm x 90cm: 2 tiles (1.62sqm) per box | 120cm x 60cm 2 tiles (1.44sqm) per box|
|Box Weight||90cm x 90cm: 35.7kg per box | 120cm x 60cm: 31.7kg per box|
|Boxes Per Pallet||90cm x 90cm: 20 boxes (32.4sqm) per pallet | 120cm x 60cm: 36 boxes (51.84sqm) per pallet|
|Grade||Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors|
|Installation Points||Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond.|
|Blending||Shade and colour variation should be expected in our ‘natural’ look porcelain products. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. A good number of packs should be opened at a time and blended.|
|Popular Grout Colours||BEIGE: Rocatex Ultimate Almond - Ardex FS Classic Vanilla - Floating Driftwood | WHITE & GREY: Ardex FS Silver Shimmer - Dove Grey - Rocatex Ultimate Cement Grey - Light Grey | ZINC: Rocatex Ultimate Cement Grey - Anthracite - Ardex FS Silver Shimmer - Cast Iron|
|Recommended Sealer||Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc|
|Anti-Slip Option 10mm||An R11 Anti-Slip 10mm thick option is available to order in all colours. Tile size is 59.5cm x 59.5cm. If used outdoors this must be installed on a solid concrete/screed base. Lead times apply. A minimum order quantity of 43.2sqm applies.|
|Recommended Adhesive||EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.|
|External Anti-Slip Option 20mm||An External R11 Anti-Slip 20mm thick option is available to order in GREY or ZINC. Tile size is 90cm x 90cm x 2.0cm. This can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self levelling pedestals. Lead times apply. A minimum order quantity of 24.3sqm applies.|