Heritage UV Oiled Engineered Oak Herringbone
From £58.80 / M2
(Sold per pack and has a minimum quantity of 40 packs)
THIS PRODUCT IS CURRENTLY AVAILABLE AS A PRE-ORDER ITEM THROUGH THE SHOWROOM. PLEASE CALL US ON 01285 885795 FOR MORE INFORMATION.
Our very popular Heritage engineered oak flooring is available to order in the stunning large sized herringbone parquet format of 600mm (L) x 125mm (W) x 20mm (D) and a wide plank size of 2200mm (L) x 220mm (W) x 15mm (D). See Related Products below.
PRICES ARE PER PACK EXCLUDING DELIVERY. We operate a minimum order quantity of 40 boxes (24sqm) on this pre-order Herringbone Oak. Pack size is listed under the specification tab along with further information on this classic grade oak floor.
Product Details | |
Pack Size 125mm x 600mm x 20/4mm Herringbone | 8 planks per pack. Pack size is 0.6sqm equating to per sqm price of £49.00+VAT. |
Pack Weight | 8kg per pack |
Packs Per Pallet | 100 packs per pallet |
Weight | 13.5kg per sqm |
Board Thickness | 20mm thick board, 16mm ply back 4mm oak top layer |
Technical | |
Finishing Oil | UV Oil |
Grade | CLASSIC GRADE: Classic Grade wood exhibits the natural variation of timber without or with much less of the more characterful features in Natural & Rustic Grade. Boards with very few knots are mixed with some that contain larger knots or checks which may be filled. The colour variation from heartwood to sapwood is to be expected but to a lesser degree. |
Installation Points | Engineered Herringbone Oak Flooring cannot be floated over an underlay. The planks must be solidly attached (glue down method) to the sub-floor using an appropriate adhesive. |
Glue-Down | We recommend fixing engineered oak, where possible, with the Glue-down method. Using a high-quality adhesive will result in the most stable floor installation as the base of each board is bonded directly to the sub-floor. No underlay is needed and no gluing of the tongue and groove is required. We recommend Bona Quantum flexible wood flooring adhesive though many other brands are available – speak with your installer as they will likely have a tried and tested product they can supply. |
Floating | Glue-down method is not appropriate for sub-floors that are damp, are mixed i.e. timber subfloor combined with concrete/screed sub-floor or have specific requirements such as acoustic deadening. With sub-floors of this type the Floating installation method will likely be proposed by your installer. The boards are not fixed to the sub-floor but instead uses the weight of the floor itself to keep them in place, usually with the use of an underlay between the sub-floor and boards. The tongue & groove would normally be glued in a floating installation. NB: Beswick stone do not provide underlay, glue or any other wood installation product. HERRINGBONE cannot be installed in this manner, see 'INSTALLATION POINTS' above. |
Blending | Shade and colour variation should be expected in our real timber engineered oak products. Each board will react differently to the finishing processes used and have unique characteristics such as knots and highlighted grain. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As always when laying real timber flooring a good number of packs should be opened at a time and blended. |
Cleaning | The Bona Premium Spray Mop for Oiled Wood Floor is the easiest and most effective way of cleaning oiled wood floors in the home. Simply spray and wipe the floor clean. It cleans and nourishes your oiled wood floor while providing extra protection. |