Your shopping cart is empty!
Product Code: StoneCSTEX
Availability: In Stock
Castile Soft Tumbled Outdoor Flagstone
Castile Soft Tumbled Outdoor Flagstone
From £66.00 per sqm
(Sold per sqm and has a minimum quantity of 10 sqm)
0 SQM
£66.00 /sqminc VAT
Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
SCROLL DOWN FOR FULL INSPIRATION SHOTS
Our hugely popular Castile limestone finished for external use.
If you are looking for a beautiful Cotswold / Bath stone coloured external limestone then look no further than our stunning Castile Soft Tumbled Outdoor Flagstone. In the same 60cm x mixed length format to compliment our internal castile tiles, these exterior flags are 3cm (30mm) thick and finished with an anti-slip finish to provide grip under foot. The edges are gently aged in the same way as the indoor flags, creating a subtle & charming time-trodden aesthetic. Castile limestone is a beautifully coloured stone, full of beachy sand, honey & pale gold tones, hot enough to warm up an outdoor entertainment space whatever the weather. Packed with fabulous fossil details, quartz and mineral highlights, this is a statement limestone for outside use. Tough & hard-wearing yet charming & stylish, Castile Soft Tumbled Outdoor Flagstone has to be considered for your landscaping scheme.
Product snapshot:
• Stone: Limestone
• Colour: Cotswold, Sand, Beige & Honey
• Format: 60cm width flagstones x mixed lengths 70cm through 100cm x 3.0cm thick (600mm x ML x 30mm)
• Use: Outdoor patios & paving
• Outdoor Steps: 100cm x 35cm x 5cm thick, front edge finished with a full bullnose
PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 10sqm on the flagstone & 3cm thick cobble, 5 pieces on the steps and 8sqm on the 4cm thick herringbone/block sett.
Also available are our outdoor cobbles & slim stone setts: these lovely outdoor finished settts are perfect for landscaping pathways, courtyards and the like.
PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£45.00+VAT) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white box labelled SQM (next to the 'Prices include VAT' box) to add correctly to your shopping cart.
A full sample of our Courtyard Cobble / Slim-Sett Herringbone can be ordered from Related Products below.
KERBSIDE DELIVERY IMPORTANT INFORMATION (PDF)
IF THE GALLERY SHOTS FAIL TO SHOW PROPERLY SIMPLY REFRESH THE PAGE
| Product Details | |
| Material | Limestone |
| Courtyard Finish | A soft, gently aged edge with a textured, external grade surface. |
| Finish | Gently Aged Edges & textured, external grade surface |
| Stableyard Finish | A gently aged & undulating edge with a textured, external grade surface. |
| Random Lengths | This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect. |
| Weight | Flagstone & Cobbles: 85kg per sqm | Step Tread: 55kg per step |
| Step Tread | Unlike flagstones, Step Treads are sold per piece. Castile step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too. |
| Courtyard Cobbles | Our Castile courtyard cobbles are 15cm wide by mixed lengths (15, 20 & 25cm) and are 3cm (30mm) thick. We recommend using a slurry primer (aka Bond bridges or bond coats) to improve adhesion of the cobbles to the mortar bed. |
| Herringbone Setts | Stableyard finsih herringbone/block setts are 30cm long by 7.5cm wide by 4cm (40mm) thick. We recommend using a slurry primer (aka Bond bridges or bond coats) to improve adhesion of the cobbles to the mortar bed. Can be installed in herringbone, double herringbone & mosaic pattern. |
| Technical | |
| Suitability | Flagston, Courtyard Cobbles & Herringbone/Block Setts: Outdoors, Floors | Step Tread: Indoors & Outdoors |
| Installation Points | This is a 30mm thick flag so can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used. |
| Accessories | |
| Recommended Sealer | Rocatex Paving & Stone Patio Sealer |
