Doc Grey Porcelain

Doc Grey is a bold tile, in keeping with the much sought after blue-grey limestones. With a smoky sheen and light grey undertones, Doc Grey strikes the perfect balance between cool tones and elegant chic. All Doc Porcelain tiles are finished with an aged edge, adding to the rustic finish of this French-inspired design. Doc Grey is the darkest of the range, bringing smoky marbled streaks to the surface of the tile. A statement tile in size and design. When combined with pale grey or limestone coloured grouting, the aged finish highlights the quality of each unique tile. Not only is Doc Grey stoneware porcelain unfailingly stylish, its practicality means it can cope with the heavy demands of modern family living. Perfectly suited to lively kitchens, busy hallways, and bustling bathrooms, the chic grey palettes in the Doc Grey porcelain tile will beautifully complement all fixtures and furnishings. An unobtrusive but attractive mottled texture gives warmth and depth, while retaining an air of contemporised cool. Blend with fixtures, fittings and dressings in almost any hue, fabric or finish – try tropical tones to add energy, zest and vibrancy or embrace Zen with soft blues and tranquil earth tones. Whatever you choose, Doc Grey Porcelain provides you with a glorious canvas to make your mark on.

Doc Grey stone look indoor-porcelain offers exceptional value for money now reduced to just £29sqm+VAT and delivery. These are high grade, Italian porcelain tiles, immensely durable and stain-proof.

Tile formats available:

- Standard R10 10mm thick internal format: Our hugely popular internal tile for use in both residential and commercial interiors, finished with a subtle worn aged edge. Minimum order quantity (MOQ): 4boxes (6.48sqm) – USUALLY AVAILABLE FROM STOCK.

- Dedicated R11 20mm thick external format: The dedicated 20mm external tile format in Doc Grey is available with the same worn aged edge as its internal counterpart. Being a dedicated outdoor tile, this can be installed onto standard patio base or via a dry raised/floating installation using fixed or self-levelling pedestals. MOQ is 45boxes (24.3sqm). THIS IS A PRE-ORDER ITEM. Price is £59sqm+VAT & delivery. Lead time is approximately 5-6weeks from order*.

Further installation guidelines for both options can be found under the specification tab.

PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 4 boxes (6.48sqm) on the internal format. Each pack contains 3 tiles equalling 1.62sqm. For popular grout colours and further information on this flagstone look porcelain please refer to the specification tab.

*LEAD TIME: this is an estimate only and is based on the supplier having stock available. Please call us now on 01285 885795 to confirm availability and lead time.

LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at £5inc P&P. This £5 will be credited against any future order of Doc Grey Porcelain.

KERBSIDE DELIVERY INFORMATION (PDF)

Product Details
Box Size	INDOOR FORMAT: 3 tiles / 1.62sqm | OUTDOOR FORMAT: 1tile / 0.54sqm
Box Weight	INDOOR: 35.3kg | OUTDOOR: 24kg
Boxes Per Pallet	INDOOR: 27 boxes (43.74sqm) per pallet | OUTDOOR: 40boxes (21.6sqm) per pallet - based on network palletways delivery
Technical
Grade Internal Format	Wall & Floor R10 - Residential interior walls & floors | Commercial interior walls & floors
Installation Points	Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond.
Grade 20mm External Format	Outdoor / Rectified - R11 - Residential exterior | Commercial interior & exterior
External Installation Points	External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method.
Blending	Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.
Accessories
Popular Grout Colours	Rocatex Ultimate Light Grey - Silver Grey - Limestone | Ardex FS Silver Shimmer - Dove Grey
Recommended Adhesive	EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.
Recommended Grout Sealer	Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc