RECOMMENDED USE: for fixing decoupling mat / porcelain tiles / medium to dark natural stones to all non-timber sub-surfaces. More information is included under the specification tab and in the Technical download.
Grey Rapid Set Flexible Adhesive for natural stone & porcelain tiles, 20kg.
ROCATEX C2FT S1 Rapid Flex Grey is a single part, flexible wall and floor tile adhesive for fixing natural stone and tiles including ceramics, porcelain and mosaics to a variety of substrates. Suitable for interior and exterior use. Suitable for use on anhydrite screeds, concrete screeds, power floated concrete, sand & cement screeds, brick/blockwork, gypsum plaster, plaster boards, plywood, cement based tile backer boards, existing tiles and other non-porous substrates, flooring grade asphalt, epoxy damp proof membranes, underfloor heating.
- Bed Thickness: 1-20mm
- 45 Mins Pot Life
- 3 Hours Set Time
- Interior / Exterior
- Ceramic / Porcelain / Mosaics
- Natural Stones / Flagstones
- Screeds / Concrete / Timber
- Underfloor Heating
- Swimming Pools / Wet Areas
- High Grab
- Slip Resistant
- Water Resistant
- Frost Resistant
*Average Coverage: our calculator is based on the average coverage of 3.5sqm, this assumes a level sub-surface and is based on 15 to 20mm thick stone. Additional information on coverage can be found under the specification tab which will allow you to adjust your quantities as required.
|Material Type||Powder Cement Base Adhesive|
|Storage||Store unopened, clear of the ground, in a cool, dry, frost free environment.|
|Average Coverage||10mm Porcelain: 5 to 5.3sqm | 12mm Stone: 4 to 4.5sqm | 15mm Stone: 3.5 to 4sqm | 20mm stone: 3 to 3.5sqm|
|Suitability||Floors, Walls, Internal, External|
|Recommended Use||WALLS: All porcelain wall tiles | FLOORS: All porcelain & medium/dark coloured natural stone floor tiles on all non-timber substrates | For installation of decoupling mat on all non-timber sub-surfaces|