Your shopping cart is empty!
Product Code: P/CHATT Availability: Pre-Order
Chateau Talco Porcelain 
Chateau Talco Porcelain
From £46.80 / M2
(Sold per box and has a minimum quantity of 5 boxes)
0 Boxes
(Total coverage: 0 sqm) £54.00 £76.80 /boxesinc VAT
Select Sample Size
*ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Chateau Talco Limestone presents various hues of ivory and bone, adding light and warmth to even the most challenging of spaces. The splendidly alluring, authentic French limestone look Chateau Talco offers a faithful reproduction of an ancient stone that has made its way through the centuries to the present, acquiring a fresh lease of life. With the subtle gently cushioned pillowed-aged edge you have an exquisite nod to the classic French limestones of old. Perfect for modern installations and lifestyles that demand performance, ease of use and a forgiving surface, this Italian made stoneware porcelain tile creates the most beautifully pale ivory, bone & cream coloured floor. Its high chromatic variation creates intense shading effects that just add to the allure of this large format porcelain flag. The uneven surface reflects the idea of the passage of time leaving its mark, and this aspect brings warmth and charm to the stone-effect porcelain ideal for modern, sophisticated settings.
Chateau Talco indoor stone effect porcelain offers exceptional value for money now reduced to £39sqm+VAT and delivery. These are high grade, Italian porcelain tiles, immensely durable and stain-proof.
Tile formats available:
- Standard R10 10mm thick internal format: Our hugely popular internal tile for use in both residential and commercial interiors, finished with a gently pillowed aged edge. Minimum order quantity (MOQ): 5boxes (8.205sqm) – USUALLY AVAILABLE FROM STOCK.
- Dedicated R11 20mm thick external format: The dedicated 20mm external tile format in Chateau Talco is available with an undulating aged edge in the same size as its internal counterpart. Being a dedicated outdoor tile, this can be installed onto standard patio base or via a dry raised/floating installation using fixed or self-levelling pedestals. MOQ is 48boxes (26.256sqm). THIS IS A PRE-ORDER ITEM.
Specific installation guidelines for both options can be found under the specification tab.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 5 boxes (8.205sqm) on the internal format. Each pack contains 3 tiles equalling 1.641sqm. For popular grout colours and further information on this flagstone look porcelain please refer to the specification tab.
LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at £5inc P&P. This £5 will be credited against any future order of Chateau Talco Porcelain.
| Product Details | |
| Box Size | INDOOR: 3tiles / 1.641sqm per box | 20mm EXTERNAL FORMAT: 1tile / 0.5472sqm per box |
| Box Weight | INDOOR: 36.5kg per box | OUTDOOR: 24kg per box |
| Boxes Per Pallet | INDOOR: 26 boxes (42.666sqm) per pallet | OUTDOOR: 40boxes (21.888sqm) per pallet - based on network palletways delivery |
| Technical | |
| Grade Internal Format | Wall & Floor R10 - Residential interior floors | Commercial interior floors |
| Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
| Grade 20mm External Format | Outdoor / Rectified - R11 - Residential exterior | Commercial interior & exterior |
| External Installation Points | External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self-levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method. |
| Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended. |
| Accessories | |
| Popular Grout Colours | Rocatex Ultimate Limestone - Silver Grey - Almond - Jasmine | Ardex FS Fresh Snowdrop - Classic Vanilla - Natural Almond |
| Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |
| Recommended Grout Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
| External Anti-Slip Option 20mm | An External R11 Anti-Slip 20mm thick option is available to pre-order. Approximate order time of 5-6 weeks. Minimum order quantity is 48boxes (26.256sqm). Tile size is 90.6cm x 60.4cm x 2.0cm. This can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self-levelling pedestals. |
