Castile Outdoor Slim-Setts
From £66.00 / M2
(Sold per and has a minimum quantity of 8 )
0
(Total coverage: 0 sqm)Select Sample Size
Free cut samples are not available for this product. You can purchase a full sample for £5.00 inc P&P.
A stunning honey coloured limestone that has been a stalwart of our stone offering for many a year due to its west country vernacular and attractive appearance. To complement our outdoor flags and cobbles, we have now added new slim-sett blocks to our Castile range expanding your options for fabulous outside spaces.
Our new slim-sett stone block is a contemporary take on the ubiquitous stone sett. This Castile version is 30cm long by 7.5cm wide meaning it can be laid in a fabulously dynamic herringbone pattern or the uber attractive mosaic block pattern – the latter being a particular favourite of ours. The Courtyard finish on this 40mm thick stone-sett produces a softly aged edge topped off with a relatively flat face (top), which is textured to form an external grip surface. Of course, you can also opt to lay this external limestone sett linearly, forming a classic brick-bond design.
Castile’s warm honey, sand & clotted cream shades are gorgeously complemented by an abundant quartz & fossil content adding further character to this stand-out stone. This mineral content, being darker than the bed-stone, elevates each block, adding a distinct personality separating it from its sister Avignon stone. Very similar in colour to Box Hill limestone, Castile is a hard, dense stone that will happily put-up with the English climate and form a long-lasting foundation whatever your landscaping demands.
Laying pattern options are available under the Product Downloads tab.
Works With: Pair with our outdoor Castile Soft Tumbled or Castile Heavy Tumbled limestone flags, bullnosed steps and cobbles to complete your landscaping project. See Related Products below.
Product snapshot:
• Stone: Limestone
• Colour: Cotswold, sand, beige & honey
• Size: 30cm x 7.5cm x 4cm Slim-Sett tumbled herringbone/block courtyard finish
• Use: Outdoors - paving, courtyards, pathways, garden borders
• Pairs with: Castile Outdoor Flagstones, Castile Cobbles
PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 8sqm on this outdoor limestone product.
PLEASE NOTE: Cut samples are not available for this product, you do have the option of purchasing a full slim-sett sample, charged at £5inc P&P.This £5 will be credited against any future order of Castile Outdoor Slim-Setts.
Also available are our Castile external finish step treads/coping stone. 100cm long x 35cm deep x 5cm thick with the front edge finished with a bullnose profile. Priced per piece at £45each +VAT and delivery. Please see 'Related Products' below.
KERBSIDE DELIVERY INFORMATION (PDF)
Product Details | |
Material | Limestone |
Courtyard Finish | A soft, gently aged edge with a textured, external grade surface. |
Weight | 4cm thick format: 114kg per sqm |
Slim Sett Block | Our Castile COURTYARD finish herringbone/block setts are 30cm long by 7.5cm wide by 4cm thick (300mm x 75mm x 40mm) - this can be laid in herringbone, double herringbone or mosaic pattern. |
Technical | |
Suitability | Outdoors paving, patios and pathways |
Installation Points | Stone Setts can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix can be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used. We recommend using a slurry primer (aka Bond bridges or bond coats) to improve adhesion of the setts to the mortar bed. |
Accessories | |
Recommended Sealer | Rocatex Paving & Stone Patio Sealer |