Your shopping cart is empty!
Product Code: P/REBSBZ Availability: In Stock
Metallike Bronze Porcelain
Metallike Bronze Porcelain
From £46.80 / M2
(Sold per box and has a minimum quantity of 7 boxes)
0 Boxes
(Total coverage: 0 sqm) £58.80 £67.39 /boxesinc VAT
Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Our Metallike Bronze porcelain floor & wall tile is a fabulous creation celebrating the age-old bronzing technique used in sculpture. This stunning colourisation is made even more dramatic by the addition of translucent effects and colour contrasts typical of wear, recreating the appeal of aged metal with weathered marks and traces of rust. Metallike Bronze is visually striking and can be utilized anywhere in an interior scheme where dash, panache and flash are the order of the day. Available in traditional square tile sizes, including a mammoth 120cm x 120cm slab, at just 9mm thick Metallike Bronze is not just a floor tile. Our contemporary sized 120cm x 60cm rectangular slab is a great choice too, when used with modern stack tiling, this selection really is something else.
We operate a minimum order of 7boxes on the 120x60 (10.08sqm) and 9boxes on the special order 120x120 (25.92sqm).
Tile formats available:
- 120cm x 60cm Standard R10 10mm thick internal format: Minimum order quantity (MOQ): 7boxes (10.08sqm) – USUALLY AVAILABLE FROM STOCK.
- 120cm x 120cm Standard R10 10mm thick internal format: PRE-ORDER ITEM - lead time approximately 6weeks - Minimum order quantity (MOQ): 9boxes (25.92sqm) – PRE-ORDER FORMAT.
PRICES EXCLUDE DELIVERY and the price per sqm is also shown allowing easy comparison. Pack sizes are listed under the specification tab along with further information on this stone look porcelain floor.
NB: Due to the oversized nature of the 120cm x 120cm tiles a delivery surcharge applies as the pallet/s take up more than a single allotted space on the delivery network. This charge is shown clearly before checkout.
LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at £5inc P&P. This £5 will be credited against any future order of Metallike Bronze Porcelain.
| Product Details | |
| Box Size | 120cm x 60cm: 2tiles/1.44sqm per box | 120cm x 120cm: 2tiles/2.88sqm per box |
| Box Weight | 120x60: 28.8kg per box | 120x120: 57.6kg per box | |
| Boxes Per Pallet | 120x60: 30boxes (43.2sqm) per pallet | 120x120: 17boxes (49.86sqm) per DOUBLE pallet (due to the oversized nature of the 120x120 tiles delivery cost per pallet is doubled) |
| Technical | |
| Grade | Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors |
| Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
| Accessories | |
| Popular Grout Colours | Ardex FS Cast Iron |
| Recommended Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
| Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |
