Your shopping cart is empty!
Product Code: P/CABP
Availability: Pre-Order
Cabin Taupe Porcelain
Cabin Taupe Porcelain
From £42.00 / M2
(Sold per box and has a minimum quantity of 5 boxes)
0 Boxes
(Total coverage: 0 sqm)
£42.00 /boxesinc VAT
Select Sample Size
*ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Introducing a brand-new Italian stoneware porcelain which is getting lots of attention in our Cirencester showrooms. Cabin Taupe is a fabulous flagstone look tile with warm tones that will suit large open plan schemes and single spaces alike. At 120cm x 60cm this large format tile can be used on walls as well as floors, indeed stacked or column wall tiling is hugely popular now to add drama to any space and not just bathrooms. This stone effect porcelain tile is rustic and modern at the same time, a universal tile that will bring harmony to any surroundings. With strong aesthetic elements this lovely tile never fails to charm and with a dedicated 20mm thick external option in the same size available to pre-order, creating that much sought after inside to outside flow is a breeze.
Tile formats available:
- 120cm x 60cm Standard R10 10mm thick internal format: Our stunning internal tile for use in both residential and commercial interiors, finished with a contemporary square edge. Minimum order quantity (MOQ): 5boxes (7.2sqm) – USUALLY AVAILABLE FROM STOCK.
- Dedicated R11 20mm thick external format: The dedicated 20mm external tile format in Cabin Taupe is available in the same size as its internal counterpart. Being a dedicated outdoor tile, this can be installed onto standard patio base or via a dry raised/floating installation using fixed or self-levelling pedestals. This is a special pre-order item and MOQ is 36boxes (25.92sqm) – THIS IS A PRE-ORDER ITEM.
Specific installation guidelines for both options can be found under the specification tab.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order quantity of 5 boxes (7.2sqm) on this contemporary stone look porcelain. For popular grout colours and further information on this Italian stoneware porcelain please refer to the specification tab.
LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at £5inc P&P. This £5 will be credited against any future order of Cabin Taupe Porcelain.
KERBSIDE DELIVERY IMPORTANT INFORMATION (PDF)
| Product Details | |
| Box Size | INTERNAL R10 FORMAT: 2tiles / 1.44sqm per box | 20mm EXTERNAL FORMAT: 1tile / 0.72sqm per box |
| Box Weight | INTERNAL R10 FORMAT: 32kg | 20mm EXTERNAL FORMAT: 34kg |
| Boxes Per Pallet | INTERNAL R10 FORMAT: 30boxes (43.2sqm) per pallet - based on network palletways delivery | 36boxes (51.84sqm) per pallet - based on hi-ab delivery (extra costs may apply) | 20mm EXTERNAL FORMAT: 28boxes (20.16sqm) per pallet - based on network palletways delivery | 36boxes (25.92sqm) per pallet - based on hi-ab delivery (extra costs may apply) Please call us on 01285 885795 for confirmation of delivery costs. |
| Technical | |
| Grade Internal Format | Wall & Floor Rectified R10 - Residential interior walls & floors | Commercial interior walls & floors |
| Grade 20mm External Format | Outdoor / Rectified - R11 - Residential & Commercial |
| Indoor Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout (we offer Rocatex Ultimate & Ardex FS grout). For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
| External Installation Points | External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self-levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method. |
| Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended. |
| Accessories | |
| Popular Grout Colours | Rocatex Ultimate Limestone - Almond - Jasmine | Ardex FS Natural Almond - Classic Vanilla |
| Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |
| Recommended Grout Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
