Your shopping cart is empty!
Product Code: P/EONX
Availability: In Stock
EON External Porcelain
EON External Porcelain
From £58.80 / M2
(Sold per box and has a minimum quantity of 10 boxes)
0 Boxes
(Total coverage: 0 sqm)
£58.80 /boxesinc VAT
Select Sample Size
*ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
20mm EXTERNAL PORCELAIN: available from stock in Beige, Sabbia & Pepe. Tile size is 90cm x 60cm x 2.0cm with an aged edge.
Eon aged stone look external porcelain is a marvellous collection of flagstone look Italian porcelain at the amazing price of just £49sqm+Vat and delivery.Based on different limestones this range is available in 3 colours. Starting with the lovely pale Eon Sabbia, reminiscent of the fabulous sand and bone limestones from Egypt with hints of warmer cream tones and lots of limestone movement.For something warmer then Eon Beige, a wonderful darker, sand coloured tile, is certainly a popular choice. Think sandy beaches & mojitos. The collection ends with Pepe - a colour that combines both beige and grey into the hugely popular 'greige' colour so in demand now.
We operate a minimum order quantity of 10boxes (5.4sqm) on this flagstone look exterior porcelain tile. Each pack contains 1 tile equalling 0.54sqm. For popular grout colours and further information on this flagstone look external porcelain please refer to the specification tab.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison.
| Product Details | |
| Box Size | 1tile / 0.54sqm |
| Box Weight | 23.9kg |
| Boxes Per Pallet | 30boxes (16.2sqm) per pallet - based on network palletways delivery |
| Technical | |
| Grade 20mm External Format | Outdoor / Rectified - R11 - Residential exterior | Commercial interior & exterior |
| External Installation Points | External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method. |
| Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended. |
| Accessories | |
| Popular Grout Colours | SABBIA: Rocatex Ultimate Limestone - Jasmine - Ardex FL Fresh Snowdrop | BEIGE: Rocatex Ultimate Limestone - Almond - Ardex FL Classic Vanilla | PEPE: Rocatex Ultimate Silver Grey - Limestone |
| Recommended Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts |
| Recommended Adhesive | Single Part Rapid Set S1 Flexible Grey Adhesive 20kg - when installing on a solid concrete/cement/screed base. |
