Your shopping cart is empty!
Product Code: P/DOCIV
Availability: In Stock
Doc Ivory Porcelain
Doc Ivory Porcelain
From £22.80 / M2
(Sold per box and has a minimum quantity of 6 boxes)
0 Boxes
(Total coverage: 0 sqm)
£51.60
£36.94 /boxesinc VAT
Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
INDOOR FORMAT NOW EOL CLEARANCE - JUST £19sqm+VAT & DELIVERY
Exquisite French stone look porcelain with an authentic aged limestone tumble edge, Doc Ivory is faithfully reproduced and reimagined as a beautiful tile. Doc Ivory is cool as ice, pale silver greys are beautifully highlighted by darker blue-grey 'fossil' and 'quartz' detail as seen in the real limestone. As to where Doc Ivory takes its inspiration, we need only look to classical pale bone and ivory-coloured French limestone. This gorgeous ceramic facsimile bears all the intrinsic characteristics of the genuine article, including mineral veining, quartz deposits and ingrained fossils. Also replicating the tumbled edge of the original stone, which is a charming traditional aged look for floors, as with all our porcelain products Doc Ivory Porcelain offers an easy-clean and hardwearing finish. Made all the more attractive by being competitively priced with swift UK delivery. A dedicated 20mm external option is available in the same tile size of 90cm x 60cm. Pre-order lead time (in the event we don't have stock) is 5-6 weeks and there is a minimum order quantity of 24.3sqm for pre-orders on the outdoor Doc Ivory porcelain tile. Price is £59sqm+VAT & delivery.
Doc Ivory stone look indoor-porcelain offers exceptional value for money now reduced to just £34sqm+VAT and delivery. These are high grade, Italian porcelain tiles, immensely durable and stain-proof.
Tile formats available:
- Standard R10 10mm thick internal format: Our hugely popular internal tile for use in both residential and commercial interiors, finished with a subtle worn aged edge. Minimum order quantity (MOQ): 6boxes (9.72sqm)
- Dedicated R11 20mm thick external format: The dedicated 20mm external tile format in Doc Ivory is available with the same worn aged edge as its internal counterpart. Being a dedicated outdoor tile, this can be installed onto standard patio base or via a dry raised/floating installation using fixed or self-levelling pedestals. MOQ is 19boxes (10.26sqm)
Specific installation guidelines for both options can be found under the specification tab.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. For popular grout colours and further information on this flagstone look porcelain please refer to the specification tab.
LARGE SIZE SAMPLE INFORMATION INDOOR FORMAT: A single 30cm x 30cm sample is available to purchase at just £5inc P&P.
LARGE SIZE SAMPLE INFORMATION OUTDOOR FORMAT: A single 30cm x 30cm sample is available to purchase at just £7.50inc P&P.
KERBSIDE DELIVERY INFORMATION (PDF)
| Product Details | |
| Box Size | INDOOR FORMAT: 3 tiles / 1.62sqm | OUTDOOR FORMAT: 1tile / 0.54sqm |
| Box Weight | INDOOR: 35.3kg | OUTDOOR: 24kg |
| Boxes Per Pallet | INDOOR: 27 boxes (43.74sqm) per pallet | OUTDOOR: 40boxes (21.6sqm) per pallet - based on network palletways delivery |
| Technical | |
| Grade Internal Format | Wall & Floor R10 - Residential interior walls & floors | Commercial interior walls & floors |
| Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
| Grade 20mm External Format | Outdoor / Rectified - R11 - Residential exterior | Commercial interior & exterior |
| External Installation Points | External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method. |
| Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended. |
| Accessories | |
| Popular Grout Colours | Rocatex Ultimate Silver Grey - Limestone - Cement Grey | Ardex FS Snowdrop |
| Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |
| Recommended Grout Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
