KERBSIDE DELIVERY IMPORTANT INFORMATION (PDF)
Product Details | |
Material | Limestone |
Finish | 100cm Step: Hand-honed front bullnose edge, sawn rear & sides, external grip surface | 120cm Step: CNC machined honed front bullnose edge, sawn rear & sides, external grip surface |
Weight | 100cm Step: 55kg | 120cm Step: 66kg per step |
Step Tread | Unlike flagstones, Step Treads are sold per piece. Dijon/Regent step tread is 100cm or 120cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too. |
Technical | |
Suitability | Indoors & Outdoors |
Installation Points | This is a 50mm thick stone step so can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used. |