Metallike Bronze Porcelain
From £46.80 / M2
(Sold per box and has a minimum quantity of 7 boxes)
0 Boxes
(Total coverage: 0 sqm)Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
120cm x 120cm & 120cm x 60cm SIZES AVAILABLE TO PRE-ORDER, APPROX. LEAD TIME OF 4WEEKS. BOTH NOW ON SALE AT £49sqm+VAT & £39sqm+VAT RESPECTIVELY.
60cm x 60cm USUALLY AVAILABLE FROM STOCK
Our Metallike Bronze porcelain floor & wall tile is a fabulous creation celebrating the age-old bronzing technique used in sculpture. This stunning colourisation is made even more dramatic by the addition of translucent effects and colour contrasts typical of wear, recreating the appeal of aged metal with weathered marks and traces of rust. Metallike Bronze is visually striking and can be utilized anywhere in an interior scheme where dash, panache and flash are the order of the day. Available in traditional square tile sizes, including a mammoth 120cm x 120cm slab, at just 9mm thick Metallike Bronze is not just a floor tile. Our contemporary sized 120cm x 60cm rectangular slab is a great choice too, when used with modern stack tiling, this selection really is something else.
We operate a minimum order of 7boxes on this product. 7boxes of 120x60 is 10.08sqm and 7boxes of 120x120 is 20.16sqm.
PRICES EXCLUDE DELIVERY and the price per sqm is also shown allowing easy comparison. Pack sizes are listed under the specification tab along with further information on this stone look porcelain floor.
Product Details | |
Box Size | 60cm x 60cm: 3tiles/1.08sqm per box| 120cm x 60cm: 2tiles/1.44sqm per box | 120cm x 120cm: 2tiles/2.88sqm per box |
Box Weight | 60x60: 21.6kg per box | 120x60: 28.8kg per box | 120x120: 57.6kg per box | |
Boxes Per Pallet | 60x60: 40boxes (43.2sqm) per pallet | 120x60: 30boxes (43.2sqm) per pallet | 120x120: 17boxes (49.86sqm) per DOUBLE pallet (due to the oversized nature of the 120x120 tiles delivery cost per pallet is doubled) |
Technical | |
Grade | Wall & Floor R10 - Residential interior walls & floors | Residential exterior when installed onto a solid concrete/screed base | Commercial interior walls & floors |
Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout. For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
Accessories | |
Popular Grout Colours | Ardex FS Cast Iron |
Recommended Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc |
Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |
External Anti-Slip Option 20mm | An external R11 Anti-Slip 20mm thick option is available to order. Tile size is 90cm x 90cm. This can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self-levelling pedestals. Lead times apply. A minimum order quantity of 24.3sqm (30boxes) applies. Please call us on 01285 885795 for further information. |