Your shopping cart is empty!
Eon Beige Porcelain
Product Code: P/EONB
Availability: In Stock
Eon Beige Porcelain
Eon Beige Porcelain
From £42.00 / M2
(Sold per box and has a minimum quantity of 6 boxes)
0 Boxes
(Total coverage: 0 sqm)
£42.00 /boxesinc VAT
Select Sample Size
*ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Eon Beige aged stone look porcelain is a gorgeous flagstone effect Italian porcelain at the great price of just £35sqm+VAT and delivery.
Taking inspiration from popular pale honey-coloured limestone, Eon Beige is a fabulously versatile floor suiting a wide range of interior styles. This wonderful sandy Beige stoneware porcelain should definitely be your port of call for any project that requires a low maintenance, high-use authentic looking flagstone floor. A rich, balmy beach coloured tile, this isn’t your boring beige but a temperate toasty tile, a great choice to add warmth to any scheme.
Eon Beige is available in the popular flagstone size of 90cm x 60cm and is just 1cm thick.
With a dedicated 20mm external Eon Beige porcelain flag available from stock in the same size, creating that hugely desirable modern flow from inside to out is simple.
Design Tip: By changing the grout height level you can completely change the look from an aged tile to a contemporary one. A lower grout height produces a straight, more contemporary edge. Whilst a higher grout level emphasises the aged edge.
Tile formats available:
- Standard R10 10mm thick internal format: Our hugely popular internal tile for use in both residential and commercial interiors, finished with a subtle worn aged edge. Minimum order quantity (MOQ): 6boxes (6.48sqm) – USUALLY AVAILABLE FROM STOCK.
- Dedicated R11 20mm thick external format: The dedicated 20mm external tile format in EON beige is available with the same worn aged edge as its internal counterpart. Being a dedicated outdoor tile, this can be installed onto standard patio base or via a dry raised/floating installation using fixed or self-levelling pedestals. MOQ is 10boxes (5.4sqm) - USUALLY AVAILABLE FROM STOCK.
Specific installation guidelines for both options can be found under the specification tab.
PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 6boxes (6.48sqm) on the internal format and 10boxes (5.4sqm) on the external format. Popular grout colour/s are listed under the specification tab along with further information on this aged stone effect porcelain tile.
LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at £5inc P&P. This £5 will be credited against any future order of Eon Beige Porcelain.
KERBSIDE DELIVERY IMPORTANT INFORMATION (PDF)
| Product Details | |
| Box Size | INTERNAL TILE: 2tiles / 1.08sqm | EXTERNAL TILE: 1tile / 0.54sqm |
| Box Weight | 24kg |
| Boxes Per Pallet | INTERNAL: 39boxes (42.12sqm) per pallet - based on network palletways delivery | 45boxes (48.6sqm) per pallet - based on hi-ab delivery (extra costs may apply) | EXTERNAL 30boxes (16.2sqm) per pallet |
| Technical | |
| Grade Internal Format | Floor R10 - Residential interior floors | Commercial interior floors |
| Installation Points | Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout (we offer Rocatex Ultimate & Ardex FS grout). For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond. |
| Grade 20mm External Format | Outdoor / Rectified - R11 - Residential exterior | Commercial interior & exterior |
| External Installation Points | External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method. |
| Blending | Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended. |
| Accessories | |
| Popular Grout Colours | Rocatex Ultimate Limestone - Almond | Ardex Classic Vanilla FS - Natural Almond |
| Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |
| Recommended Grout Sealer | Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms floors, hallways etc |
