Product Code: P/RSIV Availability: Pre-Order
P/RSIV

Rockshore Ivory Porcelain

From £48.00 / M2

(Sold per box and has a minimum quantity of 5 boxes)

0
M2
Qty of boxes
(Total coverage: 0 sqm)

0 Boxes

(Total coverage: 0 sqm)
£48.00 /boxesinc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

20mm EXTERNAL OPTION: available to pre-order.

A beautiful and subtly textured large format pale ivory & bone coloured porcelain tile from Italy. Rockshore Ivory porcelain is 120cm x 60cm - a fabulous size for large open plan floor spaces that demand a light and attractive floor that is does not diminish the space and is easy to clean and maintain. Being porcelain, Rockshore Ivory tiles are non-porous and stain-proof producing a stunning floor that you don't have to work hard on to keep it looking great. The pale tones of this almost Portland limestone coloured, stone look tile lend themselves to any interior scheme, an ease to build upon this foundation with a myriad of options of interior furnishings & paint colours. This light coloured stone tile also looks fabulous in bathrooms, go modern with a stacked full height tile scheme on walls to add height to the room whilst keeping the same contemporary pattern for the floor. Also available as an order-in-item is a dedicated 20mm thick external version of the same tile so you can create that seamless inside to outside transition.

Tile formats:
- Standard R10 10mm thick internal format: This fabulous contemporary stone look internal tile for use in both residential and commercial interiors, finished with a subtle textured face. Minimum order quantity (MOQ): 5boxes (7.2sqm) – usually from stock

- Dedicated R11 20mm thick external format: The dedicated 20mm external tile pre-order* format in Rockshore Ivory is available in the same tile size as its internal counterpart, allowing you to form that uniform flooring from inside to out.. Being a dedicated outdoor tile, this can be installed onto standard patio base or via a dry raised/floating installation using fixed or self-levelling pedestals. MOQ: 36boxes (25.92sqm) – pre-order* product
Specific installation guidelines for both options can be found under the specification tab.

*LEAD TIME FOR PRE-ORDER PRODUCTS IS APPROXIMATELY 4-5 WEEKS: this is an estimate only and is based on the supplier having stock available. Please call us now on 01285 885795 to confirm availability and lead time.

We operate a minimum order of 5boxes (7.2sqm) on the regular internal format & 36boxes (25.92sqm) on the 20mm external tile. 

PRICES EXCLUDE DELIVERY and the price per sqm is also shown allowing easy comparison. Pack sizes are listed under the specification tab along with further information on this stone look porcelain floor.

KERBSIDE DELIVERY INFORMATION


Product Details
Box Size INTERNAL R10 FORMAT: 2 tiles / 1.44sqm per box | 20mm EXTERNAL FORMAT: 1tile / 0.72sqm per box
Box Weight INTERNAL R10 FORMAT: 36kg per box | 20mm EXTERNAL FORMAT: 33.12kg per box
Boxes Per Pallet INTERNAL R10 FORMAT: 26boxes (37.44sqm) per pallet - based on network palletways delivery | 36boxes (51.84sqm) per pallet - based on hi-ab delivery (extra costs may apply) | 20mm EXTERNAL FORMAT: 28boxes (20.16sqm) per pallet - based on network palletways delivery | 36boxes (25.92sqm) per pallet - based on hi-ab delivery (extra costs may apply) Please call us on 01285 885795 for confirmation of delivery costs.
Technical
Grade Internal Format Wall & Floor R10 - Residential interior walls & floors | Commercial interior walls & floors
Grade 20mm External Format Outdoor / Rectified - R11 - Residential & Commercial.
Indoor Installation Points Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout (we offer Rocatex Ultimate & Ardex FS grout). For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond.
External Installation Points External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self-levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method.
Blending Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.
Accessories
Popular Grout Colours Ardex* Fresh Snowdrop - Dove Grey | Rocatex Ultimate Cement Grey - Silver Grey | *We suggest Ardex FS grout for the internal format & Ardex FL grout for the external format
Recommended Sealer Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review
FOLLOW US