RECOMMENDED USE: for fixing natural stone to all non-timber sub-surfaces. More information is included under the specification tab and in the Technical download.
Single Part White Rapid Set Flexible Adhesive for natural stone & porcelain tiles, 20kg.
ROCATEX C2FT S1 Rapid Flex White is a single part, flexible wall and floor tile adhesive for fixing natural stone and tiles including ceramics, porcelain and mosaics to a variety of substrates both indoors and outdoors. Suitable for use on anhydrite screeds, concrete screeds, power floated concrete, sand & cement screeds, brick/blockwork, gypsum plaster, plaster boards, plywood, cement based tile backer boards, existing tiles and other non-porous substrates, flooring grade asphalt, epoxy damp proof membranes, underfloor heating.
- Bed Thickness: 1-20mm
- 45 mins pot life
- 3 hours set time
- Interior / Exterior
- Ceramic / Porcelain / Mosaics
- Natural Stones / Flagstones
- Screeds / Concrete / Timber
- Underfloor Heating
- Swimming Pools / Wet Areas
- High Grab
- Slip Resistant
- Water Resistant
- Frost Resistant
*Average Coverage: our calculator is based on the average coverage of 3.5sqm, this assumes a level sub-surface and is based on 15 to 20mm thick stone. Additional information on coverage can be found under the specification tab which will allow you to adjust your quantities as required.
|Material Type||Powder Cement Base Adhesive|
|Storage||Store unopened, clear of the ground, in a cool, dry, frost free environment.|
|Average Coverage||10mm Porcelain: 5 to 5.3sqm | 12mm Stone: 4 to 4.5sqm | 15mm Stone: 3.5 to 4sqm | 20mm stone: 3 to 3.5sqm|
|Suitability||Floors, Walls, Internal, External|
|Recommended Use||WALLS: All porcelain & natural stone wall tiles | FLOORS: All porcelain & pale coloured natural stone floor tiles on all non-timber substrates|