Crafted from sandstone, these rustic aged floor tiles will
bring a timeless natural charm to your home. They feature an alluring mix of cool
white hues, along with creamy undertones and highlights of bone and ivory. Highly
durable in nature, they'll look good for decades to come. Each of these tiles
is unique in colour, pattern, hue and that traditional sandstone ‘movement’.
They come in different lengths from shorter flags to long meaning you can
recreate the look and feel of traditional flagstone floors from years gone by.
Each individual flag reacts uniquely to the different aging processes applied
to this real natural stone. This produces a floor of distinct character with
same flags having an almost rivened appearance (heavily textured) to those that
look almost bush-hammered through to ones that are quite smooth with little surface
distressing. The overall look, when combined, is of an historic, lived-in
floor. If using externally please refer to our FAQs - External Stone for more
information. PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order
quantity of 5sqm on all stone products.
NOW also available with matching step treads finished with a full bullnose. Treads are 100cm x 35cm x 5cm and cost £39+VAT PER TREAD. PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£39.00+VAT) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white box labelled SQM (next to the 'Prices include VAT' box) to add correctly to your shopping cart.
Postal samples ARE NOT available for our 5cm thick step treads, the colour and finish is identical to the flagstone.
|Finish||Softly tumbled edges & light to heavy rivened surface|
|Weight||55kg - 58kg per sqm|
|Random Lengths||This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.|
|Step Tread||Unlike flagstones, Step Treads are sold per piece. London White step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too.|
|Suitability||Indoors & Outdoors, Floors|
|Indoor Installation Points||These large format natural stone tiles should be installed with a good quality S1 grade WHITE flexible adhesive and a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout). Decoupling mat is recommended for all heated-floors and/or timber sub-floors. Adhesive specification for timber sub-floors must be a good quality S2 grade WHITE adhesive. This stone must be sealed with either a good quality solvent based or water-based sealer (we offer Lithofin MN Stainstop, Rocatex Natural Finish & Rocatex C-10 Water Based sealers).|
|External Installation Points||This is 22mm thick flag can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used.|
|Popular Grout Colours||Rocatex Ultimate: Silver Grey - Ardex FL: Classic Vanilla - Natural Almond|
|Recommended Sealer||INTERNALLY: Lithofin MN Stain Stop | EXTERNALLY (if required): Lithofin MN Colour Intensifier|
|Recommended Adhesive||EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible White Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.|