Product Code: P/PROVISTR Availability: In Stock
P/PROVISTR

Provi St Remy Porcelain

From £42.00 / M2

(Sold per box and has a minimum quantity of 6 boxes)

0
M2
Qty of boxes
(Total coverage: 0 sqm)

0 Boxes

(Total coverage: 0 sqm)
£42.00 /boxesinc VAT

Select Sample Size

*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

Add to wishlist

Based on beautiful warm provence limestone, Provi St Remy stoneware porcelain is a fabulous contemporary flagstone look porcelain floor tile full of life and verve.

This stunning stone effect porcelain exhibits the same subtle mottling and tonal variations as found in the original stone. This faithful reproduction produces a wonderful floor with movement and interest. Provi St Remy is a beautiful, exquisite tile that suits any scheme & room, it can lighten up the darkest kitchen and put life back into neglected conservatories. St Remy is a traditional pale sandy gold limestone coloured tile that will suit any interior scheme where are warm stone-look floor is needed. With its gently aged edge, which can be either highlighted or de-emphasised via the grout, this lovely stone look tile really is at home in any epoch, be it a modern new build or older renovation. Available in the large rectangular flagstone sized floor format of 90cm x 60cm, this Italian made porcelain tile has the scale to excel even in the largest of open plan living spaces.

STOP PRESS: NEW 60x30cm BATHROOM TILE NOW IN STOCK!

PRICES ARE PER BOX EXCLUDING DELIVERY and the price per sqm is also shown allowing easy comparison. We operate a minimum order of 6boxes (9.72sqm) on the 90x60 indoor format, 10boxes (10.8sqm) on the 60x30 indoor format & 19boxes (10.26sqm) of the outdoor format of this stoneware porcelain. Popular grout colours are listed under the specification tab along with further information on these aged stone effect porcelain tiles.

LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at £5inc P&P. This £5 will be credited against any future order of Provi St Remy Porcelain.

LARGE SIZE SAMPLE INFORMATION OUTDOOR FORMAT: A single 30cm x 30cm sample is available to purchase at just £7.50inc P&P. This £7.50 will be credited against any future order of Provi St Remy Outdoor Porcelain. 

KERBSIDE DELIVERY INFORMATION (PDF)

Product Details
Box Size 90x60 indoor: 3tiles / 1.62sqm - 60x30 indoor: 6tiles / 1.08sqm - 90x60 outdoor: 1tile / 0.54sqm
Box Weight 90x60 indoor: 33.4kg - 60x30 indoor: 22.75kg - 90x60 outdoor: 24kg
Boxes Per Pallet 90x60 indoor: maximum of 28boxes (45.6sqm) per pallet - 60x30 indoor: maximum of 40boxes (43.2sqm) per pallet - 90x60 outdoor: maximum of 39boxes (21.06sqm) - ALL based on network palletways delivery
Technical
Grade Wall & Floor R10 - Residential interior walls & floors | Commercial interior walls & floors
Grade 20mm External Format Outdoor / Rectified - R11 - Residential exterior | Commercial interior & exterior
Indoor Installation Points Large format porcelain tiles should be installed with a good quality S1 grade flexible adhesive and a fine grain grout (we offer Rocatex Ultimate & Ardex FS grout). For large tiles it is strongly recommended that levelling clips are used and joints should be staggered by a maximum of 30% of the length of the tile AKA staggered brick bond.
External Installation Points External formats are 20mm thick so can be installed on a standard MOT type 1 base, onto a prepared concrete/screed base or via a dry raised/floating installation using fixed or self levelling pedestals. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR & SBR mixed with powdered to cement to form a bonding slurry used to prime the backs of the impervious tiles to provide a key for bonding. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. Tiles can either be grouted with a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout), or finished with a brush-in resin compound or alternative jointing method.
Blending Shade and colour variation should be expected in our ‘natural’ look porcelain products, no different to what you would see in real stone or timber. Stronger tone & colour variation can occur between batches, so it is recommended you ensure you order enough for your project in one batch. As per laying real stone/timber a good number of packs should be opened at a time and blended.
Accessories
Popular Grout Colours Natural Almond FS - Classic Vanilla FS
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING & WALLS: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.
Recommended Grout Sealer Rocatex C-10 Ultimate Grout Sealer - recommended for pale grouts and areas of heavy use such as kitchens, bathrooms walls & floors, hallways etc

Beswick Stone
FOLLOW US