Dijon Indoor Outdoor Limestone
From £45.60 / M2
(Sold per and has a minimum quantity of 5 )
0(Total coverage: 0 sqm)
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
Hailing from the same quarries as our tumbled Regent limestone, Dijon, as the name suggests, is a continuation of the stunning mid' mustard (Purbeck stone) colours, fossils and other natural stone characteristics seen in these uber popular limestone flags. Dijon limestone is a different stone seam to Regent and undergoes an additional process during production. This process brushes the stone with a series of mechanical & hand-worked fine brushes creating a more refind aesthetic to the stone than just the single tumbling process that Regent undergoes. Dijon flagstone is softly tumbled before brushing, meaning the edges are subtly aged, producing a sensitive time-worn effect. This flagstone flooring looks stunning in modern and traditional design schemes and with the large 60cm flags continued through to the outdoors, this popular limestone provides a versatile floor option for your project. Dijon is a very dense stone making it highly suitable for even the busiest family homes or commercial projects.
The external format is finished with the same gently aged edge and comes in a dedicated 30mm thick flag. The surface of the stone is etched to give this external tile a higher-grip. Our Dijon step tread is also finished with this same higher-grip surface and one 100cm side is fully bullnosed.
PRICES* ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.
*PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£39.00+VAT) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white Order by SQM box to add correctly to your shopping cart.
Postal samples ARE NOT available for our 5cm thick step treads, the colour and finish is identical to the external flagstone.
|Internal Finish||Gently aged edges & brushed surface with occasional light texture|
|External Finish||Gently aged edges & etched, high-grip surface.|
|Weight||15mm: 42kg per sqm | 20mm: 55kg per sqm | 30mm: 85kg per sqm | Step Tread: 50kg per step|
|Random Lengths||This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.|
|Step Tread||Unlike flagstones, Step Treads are sold per piece. Dijon step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too. The surface finish is the same as the external flagstone i.e. high-grip external grade surface|
|Suitability||INTERNAL 60cm x Random Lengths x 1.5/2.0cm FORMAT: Indoor, Floors. | EXTERNAL 60cm x Random Lengths x 3.0cm FORMAT: Outdoor, Floors. | Step Tread: Indoors & Outdoors|
|Indoor Installation Points||These large format natural stone tiles should be installed with a good quality S1 grade WHITE flexible adhesive and a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout). Decoupling mat is recommended for all heated-floors and/or timber sub-floors. Adhesive specification for timber sub-floors must be a good quality S2 grade WHITE adhesive. This stone must be sealed with either a good quality solvent based or water based sealer (we offer Lithofin MN Stainstop, Rocatex Natural Finish & Rocatex C-10 Water Based sealers).|
|External Installation Points||This is a 30mm thick flag so can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used.|
|Popular Grout Colours||Ardex FL: Natural Almond|
|Recommended Sealer||Rocatex Natural Finish Sealer or Lithofin MN Stain Stop|
|Recommended Adhesive||EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible White Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.|