Product Code: StoneASB Availability: In Stock

Avignon Sandblasted Limestone

From £46.80 per sqm

(Sold per sqm and has a minimum quantity of 5 sqm)

Qty of sqm


£54.00 £46.80 /sqminc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

A popular addition to our best-selling Avignon range of stones is the stunning Sandblasted finish available in the most popular flagstone size of 60cm widths x mixed lengths. We have kept the original gently aged or ‘soft’ tumbled edges so beloved as it allows this flagstone to be used in a myriad of property styles. By adding the sandblasted finish, we have created a stone that is a lovely pale cream colour rather than the usual sand & light mushrooms tones seen in the original Avignon. The sandblasting process also produces a light texture over the surface of the stone which means, at 2cm thick, this beautiful flagstone can be used inside & out* allowing that unified indoor/outdoor living space that is so desirable. Avignon Sandblasted stone is very similar in colour to the pale west country Bath stones, with lovely cream hues interspersed with touches of warm sand tones creating a stunning flagstone floor of great desirability. We are especially delighted to bring you this fabulous flagstone floor at the fantastic reduced price of £39sqm+VAT and delivery. Previously £45sqm+VAT. 

PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.

*For external installation information please refer to the specification tab.



Product Details
Material Limestone
Finish Gently aged edges & sandblasted surface producing light to medium texture
Weight 55kg per sqm
Random Lengths This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.
Suitability Indoors & Outdoors, Floors
Installation Points When laying internally this limestone must be installed with a good quality white adhesive. Flexibility and full specification will depend on the age and type of your sub-floor.
External Installation Points This 20mm thick flag and can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used.
Popular Grout Colours Ardex FL: Natural Almond
Recommended Sealer INTERNALLY: Lithofin Multiseal | EXTERNALLY: Rocatex C10-Ultimate Water Based Sealer
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible White Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review