Product Code: StoneOHL Availability: In Stock

Old Heritage Flagstone

From £46.80 per sqm

(Sold per sqm and has a minimum quantity of 5 sqm)

Qty of sqm


£46.80 /sqminc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

Create a rustic countryside escape with this heritage limestone flooring. These mid-toned blue-grey tiles feature an array of hues, from cool silver to deep charcoal. Each individual stone has been hand-distressed for an age old look and feel. They have minimally tumbled edges, so you can achieve a narrow grout line. For a truly seamless look, these versatile flagstones can be used inside and outdoors. Find more information about external fitting in our FAQ – External Stone. Old Heritage is also the external stone of choice if using Ashton Grey internally; both stones are from the same quarry and with its rougher finish Old Heritage forms the perfect partner with Ashton Grey for the seamless inside to out look. Whilst Old Heritage doesn't have a dedicated step tread available, our Windsor Light Grey step tread perfectly compliments this stone.

PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.



Product Details
Material Limestone
Finish Minimally aged edges & medium textured surface
Weight 55kg - 58kg per sqm
Random Lengths This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.
Suitability Indoors & Outdoors, Floors
Indoor Installation Points These large format natural stone tiles should be installed with a good quality S1 grade grey flexible adhesive and a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout). Decoupling mat is recommended for all heated-floors and/or timber sub-floors. Adhesive specification for timber sub-floors must be a good quality S2 grade adhesive. This stone must be sealed with either a good quality solvent based or water based sealer (we offer Lithofin MN Stainstop, Rocatex Natural Finish & Rocatex C-10 Water Based sealers).
External Installation Points This is 22mm thick flag can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used.
Popular Grout Colours Ardex FL: Natural Almond - Silver Shimmer - Cast Iron
Recommended Sealer Rocatex C-10 Water Based Ultimate Sealer
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review