Step Tread Dimensions
Windsor Light Grey Flagstone
From £44.40 per sqm
(Sold per sqm and has a minimum quantity of 5 sqm)
ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
These impressive Windsor grey flagstones make a simple yet elegant statement. Each individual tile has been softly tumbled to create a gently worn look, reminiscent of a centuries old floor. This aging process gives an almost slate like finish to this limestone creating a floor of timeless beauty enhanced by the shimmering quartz fleck abundant in this natural stone. The grey colour palette is quite unique with very soft greys, very pale green-greys through to a taupey almost pale purple-grey. Windsor limestones flags are extremely versatile and hard-wearing. Use indoors and outdoors for a truly seamless look that blends house and garden. Large in format, they come in random lengths up to 90 cm long, so each floor will be completely unique.
PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.
NOW also available with matching step treads finished with a full bullnose. Treads are 100cm x 35cm x 5cm and cost £39per tread + VAT. PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£39.00+VAT) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white box labelled SQM (next to the 'Prices include VAT' box) to add correctly to your shopping cart.
Postal samples ARE NOT available for our 5cm thick step treads, the colour and finish is identical to the flagstone.
|Finish||Minimally aged edges & lightly textured surface|
|Weight||55kg - 58kg per sqm|
|Random Lengths||This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.|
|Step Tread||Unlike flagstones, Step Treads are sold per piece. Windsor step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too.|
|Suitability||Indoors & Outdoors, Floors|
|Installation Points||When laying internally this limestone can be installed with a good quality grey adhesive. Flexibility and full specification will depend on the age and type of your sub-floor.|
|External Installation Points||This 22mm thick flag can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used.|
|Popular Grout Colours||Ardex FL: Gentle Dawn - Natural Almond - Dove Grey|
|Recommended Sealer||INTERNALLY: Rocatex Natural Finish Sealer | EXTERNALLY (if required): or Lithofin MN Colour Intensifier|
|Recommended Adhesive||EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.|