Your shopping cart is empty!
Product Code: WLGT Availability: In Stock
Windsor Light Grey Flagstone
Windsor Light Grey Flagstone
From £42.00 per sqm
(Sold per sqm and has a minimum quantity of 5 sqm)
0 SQM
£42.00 /sqminc VAT
Select Sample Size
*ORDER up to 4 small samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.
| Best Practise Stone Installation on Screed (132.96 KB) | Download |
| General Laying Guide Stone onto New Green Screed (92.88 KB) | Download |
| Outdoor Stone Installation Best Practice (212.74 KB) | Download |
| Caring for Natural Stone (133.95 KB) | Download |
| Free Length Guide (61.58 KB) | Download |
| Rocatex Patio Stone Sealer (303.19 KB) | Download |
| Rocatex Outdoor Stone & Porcelain Cleaner (285.05 KB) | Download |
SCROLL DOWN FOR FULL INSPIRATION SHOTS
These impressive Windsor grey flagstones make a simple yet elegant statement. Each individual tile has been softly tumbled to create a gently worn look, reminiscent of a centuries old floor. This aging process gives an almost slate like finish to this limestone creating a floor of timeless beauty enhanced by the shimmering quartz fleck abundant in this natural stone. The grey colour palette is quite unique with very soft greys, very pale green-greys through to a taupey almost pale purple-grey. Windsor limestones flags are extremely versatile and hard-wearing. Use indoors and outdoors for a truly seamless look that blends house and garden. Large in format, they come in mixed lengths up to 90 cm long, so each floor will be completely unique.
Product snapshot:
• Stone: Limestone
• Colour: Pale blue grey, purple grey
• Format: 60cm width flagstones x mixed lengths 70cm through 100cm x 2.2cm thick (600mm x ML x 22mm)
• Use: Outdoor patios & paving
• Outdoor Steps: 100cm x 35cm x 5cm thick, front edge finished with a full bullnose
PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.
Also available with matching step treads finished with a full bullnose. Treads are 100cm x 35cm x 5cm and cost £45per tread + VAT. PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£45.00+VAT) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white box labelled SQM (next to the 'Prices include VAT' box) to add correctly to your shopping cart.
Postal samples ARE NOT available for our 5cm thick step treads, the colour and finish is identical to the flagstone.
LARGE SIZE SAMPLE INFORMATION: A single 30cm x 30cm sample is available to purchase at just £5inc P&P. This £5 will be credited against any future order of Windsor Light Grey Flagstone.
KERBSIDE DELIVERY IMPORTANT INFORMATION (PDF)
IF THE GALLERY SHOTS FAIL TO SHOW PROPERLY SIMPLY REFRESH THE PAGE
| Product Details | |
| Material | Limestone |
| Finish | Minimally aged edges & textured surface |
| Random Lengths | This stone is sold in the mixed length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect. |
| Weight | 58kg per sqm |
| Step Tread | Unlike flagstones, Step Treads are sold per piece. Windsor step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too. |
| Technical | |
| Suitability | Indoors & Outdoors, Floors |
| Indoor Installation Points | These large format natural stone tiles should be installed with a good quality S1 grade flexible adhesive (grey is fine) and a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout). Decoupling matting is recommended for all heated-floors and/or timber sub-floors. Adhesive specification for timber sub-floors must be a good quality S2 grade adhesive. This stone must be sealed with either a good quality solvent based or water-based sealer (we offer Lithofin MN Stainstop, Rocatex Natural Finish & Rocatex C-10 Water Based sealers). |
| External Installation Points | This 22mm thick flag can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used. |
| Accessories | |
| Popular Grout Colours | Ardex FL: Gentle Dawn - Natural Almond |
| Recommended Sealer | INDOORS: Rocatex Natural Finish Sealer | OUTDOORS: Rocatex Paving & Stone Patio Sealer |
| Recommended Adhesive | EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane. |
