Product Code: WLGT Availability: Pre-Order

Windsor Light Grey Flagstone

From £44.40 per sqm

(Sold per sqm and has a minimum quantity of 5 sqm)

Qty of sqm


£44.40 /sqminc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

These impressive Windsor grey flagstones make a simple yet elegant statement. Each individual tile has been softly tumbled to create a gently worn look, reminiscent of a centuries old floor. This aging process gives an almost slate like finish to this limestone creating a floor of timeless beauty enhanced by the shimmering quartz fleck abundant in this natural stone. The grey colour palette is quite unique with very soft greys, very pale green-greys through to a taupey almost pale purple-grey. Windsor limestones flags are extremely versatile and hard-wearing. Use indoors and outdoors for a truly seamless look that blends house and garden. Large in format, they come in random lengths up to 90 cm long, so each floor will be completely unique.

PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.

NOW also available with matching step treads finished with a full bullnose. Treads are 100cm x 35cm x 5cm and cost £39per tread + VAT. PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£39.00+VAT) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white box labelled SQM (next to the 'Prices include VAT' box) to add correctly to your shopping cart.

Postal samples ARE NOT available for our 5cm thick step treads, the colour and finish is identical to the flagstone.



Product Details
Material Limestone
Finish Minimally aged edges & textured surface
Weight 55kg - 58kg per sqm
Random Lengths This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.
Step Tread Unlike flagstones, Step Treads are sold per piece. Windsor step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too.
Suitability Indoors & Outdoors, Floors
Indoor Installation Points These large format natural stone tiles should be installed with a good quality S1 grade WHITE flexible adhesive and a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout). Decoupling mat is recommended for all heated-floors and/or timber sub-floors. Adhesive specification for timber sub-floors must be a good quality S2 grade WHITE adhesive. This stone must be sealed with either a good quality solvent based or water-based sealer (we offer Lithofin MN Stainstop, Rocatex Natural Finish & Rocatex C-10 Water Based sealers).
External Installation Points This 22mm thick flag can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. If installing onto concrete/screed a good quality external grade grey tile adhesive can be used.
Popular Grout Colours Ardex FL: Gentle Dawn - Natural Almond - Dove Grey
Recommended Sealer INTERNALLY: Rocatex Natural Finish Sealer | EXTERNALLY (if required): Rocatex Natural Finish Sealer or Lithofin MN Colour Intensifier
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible Grey Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review