Product Code: StoneHCL Availability: In Stock

Hebron Cream Limestone

From £34.80 per sqm

(Sold per sqm and has a minimum quantity of 5 sqm)

Qty of sqm


£38.40 £34.80 /sqminc VAT

ORDER up to 4 samples for free (normally £3 each). Free samples are not available for some small & decorative tiles.

From hues of lemon to shades of mushroom and fawn, this limestone flooring features an exquisite mix of subtle tones. They’re accompanied by superb natural details, including age-old fossils and shimmering quartz. Each tile has been carefully aged by hand to create the appearance of a much-loved country cottage floor. It’s durable, so ideal for frequently used areas, such as hallways. Easy to clean and maintain, this pale stone is a practical and timeless choice. A 3cm thick external version is also available to create that seamless flow from inside to out.

PRICES ARE PER SQM EXCLUDING DELIVERY. We operate a minimum order quantity of 5sqm on all stone products.

Also available are our Hebron Cream external finish treads* (steps). 100cm long x 35cm deep x 5cm thick with the front edge finished with a bullnose profile. Priced per piece at £39each +VAT and delivery. 

*PLEASE NOTE: STEP TREADS are sold PER STEP so the price above (£39.00+VAT) is for one 100cm x 35cm tread and NOT per sqm. Just enter the total number of steps you require into the white Order by SQM box to add correctly to your shopping cart.

Postal samples ARE NOT available for our 5cm thick step treads, the colour and finish is identical to the external flagstone.



Product Details
Material Limestone
Internal Finish Gently aged edges & smooth surface
External Finish Gently aged edges & etched, high-grip surface.
Weight 15mm: 40kg per sqm | 30mm: 80kg per sqm | Step Tread: 48kg per step
Random Lengths This stone is sold in the random length format which means the width is consistent but the lengths are different creating a dynamic brick-bond effect.
Step Tread Unlike flagstones, Step Treads are sold per piece. Hebron step tread is 100cm long with one length finished in a bullnose (rounded) edge, the step is 35cm deep (front to back) and 5cm thick. Our step treads can be used internally and externally and are often used as coping stones too. The surface finish is the same as the external flagstone i.e. high-grip external grade surface.
Suitability INTERNAL 60cm x Random Lengths x 1.5cm FORMAT: Indoor, Floors. | EXTERNAL 60cm x Random Lengths x 3.0cm FORMAT: Outdoor, Floors. | Step Tread: Indoors & Outdoors
Indoor Installation Points These large format natural stone tiles should be installed with a good quality S1 grade WHITE flexible adhesive and a wide joint grout (we offer Rocatex Ultimate & Ardex FL grout). Decoupling mat is recommended for all heated-floors and/or timber sub-floors. Adhesive specification for timber sub-floors must be a good quality S2 grade WHITE adhesive. This stone must be sealed with either a good quality solvent based or water based sealer (we offer Lithofin MN Stainstop, Rocatex Natural Finish & Rocatex C-10 Water Based sealers).
External Installation Points This is a 30mm thick flag so can be laid directly onto an MOT type 1 external base or similar or onto a concrete/screed base. If installing onto MOT then a wet sand & cement mortar mix must be used with the addition of SBR. NB: white Portland cement must be used in place of standard grey cement. If installing onto concrete/screed a good quality external grade white tile adhesive can be used.
Popular Grout Colours Ardex FL: Classic Vanilla - Floating Driftwood
Recommended Sealer Rocatex C-10 Water Based Ultimate Sealer
Recommended Adhesive EXISTING/NEW SCREED WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S1 Flexible White Adhesive 20kg | ALL TIMBER SUBSTRATES WITH*/WITHOUT UNDERFLOOR HEATING: Single Part Rapid Set S2 Highly Flexible White Adhesive 20kg *when used with an appropriate decoupling membrane.

Write a review

Please login or register to review